PL83 and PL87 Pipelayer Systems Caterpillar


Pivot Shaft

Usage:

PL83 CB2


Illustration 1g03841927
(1) Machine main frame
(2) Sleeve bearing
(3) Track roller frame
(4) Bearing
(5) Plate
(6) Bolts
(7) Pivot shaft
(8) Seal

Pivot shaft (7) connects the main frame (1) with the track roller frames (3).

The pivot shaft extends through the main frame in order to connect the track roller frames at the rear of the tractor. Two sleeve bearings (2) in the main frame support the tractor on the pivot shaft. The pivot shaft cavity in the main frame is filled with oil, in order to lubricate the pivot sleeve bearings.

The pivot shaft is supported by the track roller frames on bearings (4). The track roller frames are filled with oil which lubricates the pivot shaft bearings. Plate (5) and bolts (6) retain the track roller frames on the pivot shaft.

Seal (8) contains the oil for the pivot shaft cavity.

Caterpillar Information System:

AP355F Asphalt Paver Shipping the Machine
Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073} Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073}
AP355F Asphalt Paver Machine Cleanup Procedure
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 1893 - FMI 12
PL83 and PL87 Pipelayers Engine Supplement Catalyst (SCR) - Remove and Install
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Electrical Power Supply - Test
AP355F Asphalt Paver Push Roller
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Final Drive Planetary - Remove and Install - Rear
2015/06/02 Expansion Of Reman Hydraulic Pumps {5070, 7754}
3412E Engine for 773E Off-Highway Trucks Sensor Signal (Analog, Active) - Test
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Final Drive Planetary - Remove and Install - Front
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive Shaft (Front) - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive and Steering Axle (Front) - Remove
AP355F Asphalt Paver Roading the Machine
816K Landfill Compactor and 815K Soil Compactor Systems Speed Sensor - Test
2015/06/23 A New Information Display is Now Used For Certain Cat® Products {7490}
AP300F Asphalt Paver Lifting and Tying Down the Machine
AP500F Asphalt Paver Machine Systems System Pressure - Release
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Remove
R3000H Load Haul Dump Power Train Final Drive and Brake - Assemble
2015/06/04 Procedure to Install Wear Blocks on the Seat Back of Certain Load Haul Dump Machines {7312}
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Install
797F Off-Highway Truck Field Assembly Fuel Tank - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.