Axle Housing and Flange - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
B | 1P-0520 | Driver Gp | 1 |
Start By:
- Remove the axle housing and the wheel flange.
- Remove retaining ring (1) and ring gear hub (2) from ring gear (3).
Show/hide table
Illustration 2 g01023874 - Remove seal (4) from wheel flange (7). Use Tooling (B) and a suitable hammer in order to remove bearing cup (5). Remove spacer (6). Use Tooling (B) and a suitable hammer in order to remove bearing cup (8).
Show/hide table
Illustration 3 g01023875 - Remove bearing cone (9) and seal (10) from pin assembly (11). Repeat for the other pin assembly.
Show/hide table
Illustration 4 g01023881 - Remove seal (12) from knuckle (13).
Show/hide table
Illustration 5 g01038749 - Remove bearing cone (14) from knuckle (13).
Show/hide table
Illustration 6 g01023876 - Use Tooling (A) and a suitable hammer in order to remove the bushing from knuckle (13).
Show/hide table
Illustration 1 | g01023873 |
Caterpillar Information System:
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Relief Valve (Steering) - Test and Adjust
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Remove
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Planetary - Disassemble
C3.8 Engines for Caterpillar Built Machines Fuel System - C3.8 Tier 4 Final EU Stage IV
AP255E Asphalt Paver Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
797F Off-Highway Truck Field Assembly Fuel Tank - Install
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Install
2015/06/04 Procedure to Install Wear Blocks on the Seat Back of Certain Load Haul Dump Machines {7312}
R3000H Load Haul Dump Power Train Final Drive and Brake - Assemble
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Remove
AP500F Asphalt Paver Machine Systems System Pressure - Release
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Install
PL83 and PL87 Pipelayers Engine Supplement Diesel Particulate Filter - Remove and Install - Clean Emissions Module
AP355F Asphalt Paver Parking Brake Manual Release
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Assemble
AP255E Asphalt Paver Engine Supplement System Pressure - Release
3412E Engine for 773E Off-Highway Trucks Inlet Air Is Restricted
AP255E Asphalt Paver Engine Supplement Water Separator, Primary Fuel Filter, and Fuel Priming Pump - Remove and Install
3412E Engine for 773E Off-Highway Trucks Intake Manifold Air Temperature Is High
3516B Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
3412E Engine for 773E Off-Highway Trucks Solenoid Valve - Test
AP300F Asphalt Paver Access Doors and Covers
AP300F Asphalt Paver Lubricant Viscosities - Fluids Recommendations