Axle Housing and Flange - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
B | 1P-0520 | Driver Gp | 1 |
C | 2S-3230 | Bearing Lubricant | 1 |
- Install bearing cone (14) onto knuckle (13).
Show/hide table
Illustration 2 g01026726 - Use Tooling (A) and a suitable hammer and install the bushing into knuckle (13).
Show/hide table
Illustration 3 g01029981 - Use Tooling (A) and install seal (12) into knuckle (13).
Show/hide table
Illustration 4 g01023875 - Install seal (10) onto pin assembly (11). Raise the temperature of bearing cone (9). Install bearing cone (9) onto pin assembly (11). Repeat for the other pin assembly.
Note: Use Tooling (C) after installing bearing (9) to pack bearing.
Show/hide tableIllustration 5 g01023874 - Use Tooling (B) and a suitable hammer and install bearing cup (8) into wheel flange (7). Install spacer (6). Use Tooling (B) and a suitable hammer and install bearing cup (5) into wheel flange (7). Install seal (4).
Show/hide table
Illustration 6 g01023873 - Install ring gear hub (2) into ring gear (3). Install retaining ring (1).
Show/hide table
Illustration 1 | g01038749 |
End By:
- Install the axle housing and the wheel flange.
Caterpillar Information System:
AP355F Asphalt Paver Parking Brake Manual Release
PL83 and PL87 Pipelayers Engine Supplement Diesel Particulate Filter - Remove and Install - Clean Emissions Module
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Disassemble
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Relief Valve (Steering) - Test and Adjust
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Remove
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Planetary - Disassemble
C3.8 Engines for Caterpillar Built Machines Fuel System - C3.8 Tier 4 Final EU Stage IV
AP255E Asphalt Paver Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
797F Off-Highway Truck Field Assembly Fuel Tank - Install
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Install
AP255E Asphalt Paver Engine Supplement System Pressure - Release
3412E Engine for 773E Off-Highway Trucks Inlet Air Is Restricted
AP255E Asphalt Paver Engine Supplement Water Separator, Primary Fuel Filter, and Fuel Priming Pump - Remove and Install
3412E Engine for 773E Off-Highway Trucks Intake Manifold Air Temperature Is High
3516B Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
3412E Engine for 773E Off-Highway Trucks Solenoid Valve - Test
AP300F Asphalt Paver Access Doors and Covers
AP300F Asphalt Paver Lubricant Viscosities - Fluids Recommendations
3516B Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
794 AC Off-Highway Truck Field Assembly Platform - Install
2015/06/25 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/26 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}