Removal Procedure
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 187-2718     | Filter Wrench As     | 1     |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Personal injury or death may result from failure to adhere to the following procedures. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. |
- Open engine access door (1) .
Illustration 1 | g03842337 |
- Drain the fuel from the fuel tank.
Illustration 2 | g03842340 |
- Disconnect hoses (3) .
- Use Tooling (A) to remove fuel filter (4). Refer to Operation and Maintenance Manual, "Fuel System Water Separator Element - Replace".
- Remove the bolts and fuel filter base (2) .
Installation Procedure
- Install fuel filter (4) in the reverse order of removal.