Window Wiper
Show/hide table
| |
| Illustration 1 | g03749876 |
|
Front view | |
Show/hide table
| Specification for 246-0730 Window Wiper Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 2 | Nut | Torque to |
| A | - | - | Distance of the wiper blade from the glass edge of the window in the park position is |
| 2 | 2 | 5C-7261 Nut | Use the following tightening procedure during wiper arm installation:
1. Tighten the wiper arm nut to 2. Wait for minimum 0.5 hour to maximum 4 hours. 3. Again, tighten the wiper arm nut to 4. Tighten the wiper arm nut to |
| 3 | 1 | 6V-7419 Wiper Blade | Torque to |
| B | - | - | Angle for the window wiper arm group from the automatic park position is 50 degrees. |
| 4 | 1 | 8T-5400 Connector As | Torque to |
| 5 | 1 | 344-9057 Window Wiper Arm Gp | Tension of the window wiper arm group in the loaded position is |
Show/hide table
| |
| Illustration 2 | g03749877 |
|
248-2618 Window Wiper Motor Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| D | - | - | Wiping angle from automatic parking position is 50 ± 2 degrees. |
Caterpillar Information System:
735C and 745C Articulated Trucks Machine Systems Transmission Planetary
320D2 Forest Machine Machine System Specifications Window Wiper
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Electronic Control Module (ECM) - Configure
CP34 and CS34 Vibratory Soil Compactors Propel System Hydraulic Oil Contamination - Test
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Measurement Accuracy
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Features
3516B Generator Set Engines with Dynamic Gas Blending Cold Cylinder Cutout
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems System Pressure - Release
2014/11/27 New Multifunction Switch As Is Now Available for Certain Series F Off-Highway Trucks, and Series G Wheel Tractor-Scrapers {1429, 1435, 7305, 7306}
735C and 745C Articulated Trucks Machine Systems Relief Valve (Transmission Hydraulic Control) - Electronic Main Relief Valve EMRV
568 Forest Machine Machine System Specifications Heater and Air Conditioner Mounting
3516B Generator Set Engines with Dynamic Gas Blending Cat Data Link
3516E Generator Set Engine Electronic Control System Operation
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Shaft - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Gear Pump Flow - Test - Charge and Steering
AP1055F Asphalt Paver Machine Systems Electrical System (Auxiliary Hydraulic)
735C and 745C Articulated Trucks Machine Systems Service Brake Air - Purge
AP1055F Asphalt Paver Machine Systems Hydraulic System (Auxiliary)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960} Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960}
2014/12/11 A New Rod is Being Used to Support Hydraulic Lines on Certain Track Feller Bunchers {0679, 5057, 5456, 6501, 7051}
Installation Procedure for Hydraulic Hose Support on Certain Track Feller Bunchers{0679, 5057, 5456, 6501, 7051} Installation Procedure for Hydraulic Hose Support on Certain Track Feller Bunchers{0679, 5057, 5456, 6501, 7051}