320D2 Forest Machine Machine System Specifications Caterpillar


Window Wiper

Usage:

320D2 FM BW2


Illustration 1g03749837
Front view

Table 1
Specification for 248-0540 Window Wiper Gp 
Item  Qty  Part  Specification Description 
8T-5400 Connector As  Torque to 0.35 ± 0.05 N·m (3.10 ± 0.44 lb in)
5C-7261 Nut  Use the following tightening procedure during wiper arm installation:

1. Tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in).
2. Wait for half an hour hour minimum.
3. Again, tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in)
248-2620 Wiper Arm As  The arm tension is 6.0 ± 0.5 N (1.3 ± 0.1 lb)
Nut  Torque to 38 ± 2 N·m (28 ± 1 lb ft)
6V-7419 Wiper Blade  Torque to 3 N·m (27 lb in)


Illustration 2g03749838
248-2617 Window Wiper Motor Gp

Table 2
Item  Qty  Part  Specification Description 
Wiping angle from automatic parking position is 50 ± 2 degrees. 

Caterpillar Information System:

770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Electronic Control Module (ECM) - Configure
CP34 and CS34 Vibratory Soil Compactors Propel System Hydraulic Oil Contamination - Test
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Measurement Accuracy
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Features
3516B Generator Set Engines with Dynamic Gas Blending Cold Cylinder Cutout
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems System Pressure - Release
2014/11/27 New Multifunction Switch As Is Now Available for Certain Series F Off-Highway Trucks, and Series G Wheel Tractor-Scrapers {1429, 1435, 7305, 7306}
735C and 745C Articulated Trucks Machine Systems Relief Valve (Transmission Hydraulic Control) - Electronic Main Relief Valve EMRV
568 Forest Machine Machine System Specifications Heater and Air Conditioner Mounting
320D2 Forest Machine Machine System Specifications Relief Valve (Line)
AP1055F Asphalt Paver Machine Systems Operator Controls (Auxiliary Hydraulic System)
735C and 745C Articulated Trucks Machine Systems Transmission Planetary
320D2 Forest Machine Machine System Specifications Window Wiper
3516B Generator Set Engines with Dynamic Gas Blending Cat Data Link
3516E Generator Set Engine Electronic Control System Operation
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Shaft - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Gear Pump Flow - Test - Charge and Steering
AP1055F Asphalt Paver Machine Systems Electrical System (Auxiliary Hydraulic)
735C and 745C Articulated Trucks Machine Systems Service Brake Air - Purge
AP1055F Asphalt Paver Machine Systems Hydraulic System (Auxiliary)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960} Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.