Axle Shaft - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the axle housing and the wheel flange.
- Drain the oil from the axle. Refer to Operation and Maintenance Manual, "Differential Oil (Front) - Change" for the correct draining and filling procedure.
Show/hide table
Illustration 1 g01023934 - Remove axle shaft (1) from axle housing (2).
Show/hide table
Illustration 2 g01026864 - Remove seal (3). If necessary, remove bushing (4) from axle housing (2).
Show/hide table
Illustration 3 g01026866 - If necessary, remove upper and lower bearing cups (5).
- Install axle shaft (1) in the reverse order of removal.
- Use Tooling (A) and install bearing cups (5), bushing (4), and seal (3).
Caterpillar Information System:
3516E Generator Set Engine Electronic Control System Operation
3516B Generator Set Engines with Dynamic Gas Blending Cat Data Link
320D2 Forest Machine Machine System Specifications Window Wiper
735C and 745C Articulated Trucks Machine Systems Transmission Planetary
320D2 Forest Machine Machine System Specifications Window Wiper
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Electronic Control Module (ECM) - Configure
CP34 and CS34 Vibratory Soil Compactors Propel System Hydraulic Oil Contamination - Test
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Measurement Accuracy
770G and 772G Off-Highway Trucks and 773G and 775G Quarry Trucks VIMS 3G and Payload Features
3516B Generator Set Engines with Dynamic Gas Blending Cold Cylinder Cutout
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems System Pressure - Release
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
CP34 and CS34 Vibratory Soil Compactors Machine Systems Gear Pump Flow - Test - Charge and Steering
AP1055F Asphalt Paver Machine Systems Electrical System (Auxiliary Hydraulic)
735C and 745C Articulated Trucks Machine Systems Service Brake Air - Purge
AP1055F Asphalt Paver Machine Systems Hydraulic System (Auxiliary)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960} Assembly Procedure for the X Truck Body for the 793F Off-Highway Truck {0679, 7000, 7250, 7258, 7960}
2014/12/11 A New Rod is Being Used to Support Hydraulic Lines on Certain Track Feller Bunchers {0679, 5057, 5456, 6501, 7051}
Installation Procedure for Hydraulic Hose Support on Certain Track Feller Bunchers{0679, 5057, 5456, 6501, 7051} Installation Procedure for Hydraulic Hose Support on Certain Track Feller Bunchers{0679, 5057, 5456, 6501, 7051}
AP1055F Asphalt Paver Machine Systems Piston Pump (Auxiliary)
AP1055F Asphalt Paver Machine Systems Control Valve (Auxiliary Manifold)
AP1055F Asphalt Paver Machine Systems Control Valve (Hopper Hoist, Tow Point)