Before/After
| PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK HARDWARE ON CERTAIN 3512C OIL WELL SERVICE ENGINES |
7606 1408
|
PS46061 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS46061" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 14Nov2018 Service Letter. Changes have been made to the Affected Product. |
The Product Link Hardware was not installed at the factory on certain 3512C Oil Well Service Engines. |
Qty |
Part Number |
Description |
3 |
0L1351 |
BOLT |
2 |
0S1591 |
BOLT-HEX HEAD |
3 |
0S1594 |
BOLT |
2 |
4P7581 |
CLIP-LADDER |
3 |
5M2894 |
WASHER-HARD |
4 |
7K1181 |
STRAP-CABLE |
4 |
7X0264 |
BOLT |
8 |
8C5607 |
MOUNT |
4 |
8C5608 |
SPACER |
4 |
8T4138 |
BOLT-HEX HEAD |
6 |
8T4205 |
WASHER-HARD |
2 |
9S8752 |
NUT-FULL |
8 |
9X6165 |
WASHER |
4 |
9X8256 |
WASHER |
2 |
1325789 |
CLIP-LADDER |
1 |
4255729 |
MOUNTING GP |
1 |
4266243 |
HARNESS AS |
1 |
4339722 |
FILM-WIRELESS CO |
1 |
4339728 |
FILM-WARN WIRELE |
1 |
4339730 |
FILM-WARN WIRELE |
1 |
4475512 |
HARNESS AS |
1 |
4803534 |
CONTROL GP-ELEK |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 16% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Install the parts listed in the Parts Needed per the Installation Procedure in Special Instruction, REHS7339. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-8000 hrs, 0-24 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 10.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|