Torque Converter to Transmission, Output Transfer Gears - Connect
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 422-2352 | Support Stand | 1 |
| B | 439-3939 | Link Bracket As | 1 |
| C | 386-6030 | Lever Puller Hoist Gp | 1 |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Attach Tooling (B), Tooling (C), and a suitable lifting device to torque converter (1). The weight of torque converter (1) is approximately
268 kg (590 lb) . Use Tooling (B), Tooling (C), and the suitable lifting device in order to connect torque converter (1) to transmission (9). - Install the washers and bolts (10).
Show/hide table
Illustration 2 g03671097 - Install tube assembly (7).
- Connect tube assembly (6).
- Position harness assembly (3) and attach cable straps (8).
Show/hide table
Illustration 3 g03671090 - Install tube assembly (4). Connect clamp (5) to torque converter (1).
Show/hide table
Illustration 4 g03671019 - Connect harness assembly (3). Attach cable straps (2).
Show/hide table
Illustration 5 g03670821 - Keep torque converter (1), the transmission, and the output transfer gears on the suitable cribbing and Tooling (A).
Show/hide table
| |
| Illustration 1 | g03671180 |
End By:
- Install the torque converter, the transmission, and the output transfer gears.
Caterpillar Information System:
Cat® Terrain for Track-Type Tractor with Blade Control Display Module
794 AC Off-Highway Truck Systems Front Suspension (Cylinder)
794 AC Off-Highway Truck Systems Rear Suspension (Cylinder)
794 AC Off-Highway Truck Systems Pressure Sensor (Payload Monitor)
SE60 Asphalt Screed Power Adjuster Motor Group (Extender Height) - Remove and Install
SE60 Asphalt Screed Power Adjuster Motor Group (Sloper) - Remove and Install
725C Articulated Truck Clean Emissions Module - Remove and Install
SE60 Asphalt Screed Screed Frame (Extender) - Remove and Install
SE60 Asphalt Screed Screed Frame (Main) - Remove and Install
SE60 Asphalt Screed Screed Plate (Main) - Remove and Install
SE50 VT Asphalt Screed Shoe (End Gate) - Remove and Install
SE50 V Asphalt Screed System Pressure - Release
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Pilot System
16M Series 3 and 18M Series 3 Motor Grader Hydraulic Fan Speed - Test
16M Series 3 and 18M Series 3 Motor Grader Oil Cooler (Hydraulic Fan)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Transmission from Output Transfer Gears - Separate
2014/05/09 New Software Patch Available for MineStar Fleet Office v3.1.1 {7605}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Monitoring System (Brake Functions)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Monitoring System (Steering Functions)
R1700G Load Haul Dump Machine Systems Brake Release Cylinder - Assemble
2014/05/16 A New Machine Software Group Is Now Available for Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7610, 7620}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Transmission to Output Transfer Gears - Connect
725C Articulated Truck Engine - Remove and Install
Installing a New Alternator Group on Certain Low Altitude 793D Off-Highway Truck Engines{1405, 1408} Installing a New Alternator Group on Certain Low Altitude 793D Off-Highway Truck Engines{1405, 1408}