PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DUPLEX OIL FILTER CONTROL VALVE PLATE ON CERTAIN C175-16 MARINE ENGINES PETROLEUM AND MARINE AND C175-16 PETROLEUM GENERATOR SET ENGINES
Usage:
TEBE4161-00
Show/hide table
| 13May2016 |
U-234
A-180
D-213
O-207
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DUPLEX OIL FILTER CONTROL VALVE PLATE ON CERTAIN C175-16 MARINE ENGINES PETROLEUM AND MARINE AND C175-16 PETROLEUM GENERATOR SET ENGINES |
|
| 7557 | PI32631 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI32631" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32631" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 30Nov2016 | 31May2017 |
PROBLEM
Show/hide table
| The duplex oil filter control valve plate needs to be replaced on certain C175-16 Marine Engines Petroleum and Marine and C175-16 Petroleum Generator Set Engines. The existing plate can be incorrect. If the plate is incorrect, when performing an oil change, oil pressure maybe present at the servicing location. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C175-16 | M6A01000-01008 M6B01002-01004 P5P01001-01002 P6L01018-01091 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 4 | 2F0808 | SCREW-DRIVE |
| 1 | 4982819 | PLATE-CONTROL VALVE |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 16% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Remove the rivets from the existing plate and remove the old plate. Install the new 498-2819 Plate. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| Owners in the following countries will receive the attached Owner Notification: US Canada |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| EXAMPLE COPY OF OWNER NOTIFICATION XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING DUPLEX OIL FILTER CONTROL VALVE PLATE MODELS INVOLVED - CERTAIN C175-16 MARINE ENGINES PETROLEUM AND MARINE AND C175-16 PETROLEUM GENERATOR SET ENGINES Dear Cat Product Owner: The duplex oil filter control valve plate needs to be replaced on the products listed below. The existing plate is incorrect. When performing an oil change, oil pressure maybe present at the servicing location. You will not be charged for the service performed. Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 13May2016 when scheduling this service. We regret the inconvenience this may cause you, and urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 13May2016 Service Letter |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR CHECKING THE TORQUE FOR THE ACCESSORY DRIVE BOLTS ON CERTAIN C7 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR CHECKING THE TORQUE FOR THE ACCESSORY DRIVE BOLTS ON CERTAIN C7 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN HYDRAULIC PUMP GROUP ON CERTAIN 345D, 349D/D2/E/F AND 352F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN HYDRAULIC PUMP GROUP ON CERTAIN 345D, 349D/D2/E/F AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN PM3512C POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN PM3512C POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR STUD ON CERTAIN 3512E PETROLEUM ENGINES, AND SPF743 PUMPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR STUD ON CERTAIN 3512E PETROLEUM ENGINES, AND SPF743 PUMPERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL MODULES ON CERTAIN C175-16 PETROLEUM ENGINES AND C175-16 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL MODULES ON CERTAIN C175-16 PETROLEUM ENGINES AND C175-16 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C15 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C15 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C9 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C9 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST SYSTEM ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST SYSTEM ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTATIC VALVE MOTOR MOUNT ASSEMBLY ON CERTAIN C175-16 LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTATIC VALVE MOTOR MOUNT ASSEMBLY ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN ASPHALT PAVERS, EXCAVATORS, WHEELED EXCAVATORS, MOBILE HYDRAULIC POWER UNITS, MOTOR GRADERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, WHEEL FELLER BUNCHERS, WHEEL SKIDDERS, AND I PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST GAS VALVE (NRS) ON CERTAIN ASPHALT PAVERS, EXCAVATORS, WHEELED EXCAVATORS, MOBILE HYDRAULIC POWER UNITS, MOTOR GRADERS, TRACK-TYPE TRACTORS, WHEEL LOADERS, WHEEL FELLER BUNCHERS, WHEEL SKIDDERS, AND I
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR INLET LINES AND AFTERCOOLER ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR INLET LINES AND AFTERCOOLER ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE INLET MANIFOLD AIR TEMPERATURE (IMAT) SWITCH ON CERTAIN G3412, AND G3412C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE INLET MANIFOLD AIR TEMPERATURE (IMAT) SWITCH ON CERTAIN G3412, AND G3412C GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR MOUNTING GROUP ON CERTAIN C18 INDUSTRIAL ENGINES IN VERMEER PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR MOUNTING GROUP ON CERTAIN C18 INDUSTRIAL ENGINES IN VERMEER PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCESSORY DRIVE BEARING ON CERTAIN 3512E PETROLEUM ENGINES, AND SPF743 PUMPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCESSORY DRIVE BEARING ON CERTAIN 3512E PETROLEUM ENGINES, AND SPF743 PUMPERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COOLANT TUBE ON CERTAIN C175-16 LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE COOLANT TUBE ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER CORE ON CERTAIN 3512C HD LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SCAC VENT LINE ON CERTAIN PMG3516C (XQ1475) POWER MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING THE SCAC VENT LINE ON CERTAIN PMG3516C (XQ1475) POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STARTING AND OPTIONAL RELAY ON CERTAIN 3412C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STARTING AND OPTIONAL RELAY ON CERTAIN 3412C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN 3512C HD PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN 3512C HD PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL PRIMING SYSTEM ON CERTAIN C175 LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL PRIMING SYSTEM ON CERTAIN C175 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEAT SHIELDS ON CERTAIN C175-16 LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEAT SHIELDS ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PM3516 POWER MODULES (XQ2000 POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPAIRING RADIATOR COOLANT LEAKS ON CERTAIN PM3516 POWER MODULES (XQ2000 POWER MODULES)