Before/After
| PRODUCT SUPPORT PROGRAM FOR REWORKING THE COOLANT TUBE ON CERTAIN C175-16 LOCOMOTIVE ENGINES |
1380
|
PS45108 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45108" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 08Jun2016 Service Letter. Changes have been made to the Service Claim Allowances. |
The existing tubes are supported by non-grommeted clips on certain C175-16 Locomotive Engines. If the existing tube fails it can/will result in a loss of coolant. |
Qty |
Part Number |
Description |
1 |
2W1635 |
SPRING |
7 |
2Y5829 |
NUT-HEX |
6 |
3E4353 |
WASHER-HARD |
1 |
3E7417 |
PLUG-HD STOR |
4 |
4P0489 |
SPACER |
2 |
5V6103 |
SPACER |
3 |
6V1196 |
SEAL-O-RING |
1 |
6V3822 |
BOLT |
22 |
6V5839 |
WASHER-HARD |
4 |
7D1649 |
WASHER-HARD |
8 |
8T0356 |
BOLT |
2 |
8T0372 |
BOLT |
4 |
8T0643 |
BOLT |
4 |
8T5030 |
BOLT |
1 |
8T7876 |
SEAL-O-RING |
3 |
1030892 |
GROMMET |
4 |
1126032 |
SPACER |
2 |
1299454 |
FLANGE-CAPTIVE |
1 |
2094730 |
PLUG-METRIC STOR |
1 |
2095798 |
SEAL-O-RING |
6 |
2104460 |
BOLT-HEX HEAD |
1 |
2287100 |
SEAL-O-RING-STOR |
1 |
2416157 |
PLUG-HD STOR |
2 |
2588738 |
SEAL-O-RING |
2 |
2594597 |
SEAL-O-RING |
1 |
2915192 |
ELBOW-CLR BYPASS |
2 |
3449286 |
RING |
2 |
3467703 |
SEAL-O-RING |
1 |
3599855 |
COUPLING AS |
1 |
3624241 |
VALVE-BYPASS |
2 |
3716761 |
FLANGE |
1 |
4841007 |
TUBE AS |
1 |
4841009 |
TUBE AS |
3 |
4913921 |
CLAMP |
3 |
4913922 |
CLAMP |
1 |
4913924 |
PLATE |
1 |
4956105 |
BRACKET |
1 |
5021195 |
PLATE |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Rework the coolant tube in accordance with Special Instruction, M0068964, "Installation of the 493-0564 Water Lines Gp on Certain C175-16 Locomotive Engines". |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-19000 hrs, 0-100 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 8.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|