PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL PRIMING SYSTEM ON CERTAIN C175 LOCOMOTIVE ENGINES Caterpillar

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL PRIMING SYSTEM ON CERTAIN C175 LOCOMOTIVE ENGINES

Usage:

TEBE4355-00

Show/hide table

27May2016

U-269

D-240

O-235

Show/hide table

Before/After	PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL PRIMING SYSTEM ON CERTAIN C175 LOCOMOTIVE ENGINES
1262 1250		PS45088

Show/hide table

NOTE:

Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.

NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45088" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table

TERMINATION DATE

31May2018

PROBLEM

Show/hide table

The existing fuel priming pump and lines can cause low fuel pressure during starting on certain C175 Locomotive Engines. If the existing priming pump fails to build pressure it can/will result in the engine not starting.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
C175-16	3A900100-00136 KWT00100-00134 R1X00100-00113

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	5P1076	WASHER-HARD
2	5P8245	WASHER-HARD
2	5P9186	SEAL-O-RING
1	6V0826	GROMMET
1	6V1820	BOLT
2	6V3821	BOLT
2	6V3823	BOLT-HEX HEAD
6	6V3964	WASHER-HARD
2	6V5839	WASHER-HARD
1	6V5843	BOLT-HEX HEAD
2	6V7673	BOLT-HEX HEAD
1	6V9873	ADAPTER-STR
2	7D1649	WASHER-HARD
1	8C5748	BOLT-HEX HEAD
1	8T0100	BOLT-HEX HEAD
1	8T0106	BOLT
2	8T1897	CLIP
2	8T1898	CLIP
1	8T7492	ADAPTER-STR
1	8T7494	ADAPTER-STR
6	8T9655	MOUNT
12	9N0869	WASHER-HARD
1	0919035	SPACER
1	1115700	SPACER
2	1434654	BOLT-HEX HEAD
1	1911782	SPACER
2	1911783	SPACER
1	2147568	SEAL-O-RING-STOR
1	2169197	PLUG-HD STOR
1	2270064	ADAPTER-STR
1	2270136	PLUG-HD STOR
4	2287090	SEAL-O-RING-ORFS
3	2287091	SEAL-O-RING-ORS
6	2287092	SEAL-O-RING-ORFS
1	2287093	SEAL-O-RING-ORFS
1	2287100	SEAL-O-RING-STOR
2	2287102	SEAL-O-RING-STOR
1	2287103	SEAL-O-RING-STOR
8	2287105	SEAL-O-RING-STOR
1	2287106	SEAL-O-RING-STOR
1	2416157	PLUG-HD STOR
1	2416158	PLUG-HD STOR
6	3006714	MOUNT
2	3537952	GROMMET
1	3696670	VALVE-CHECK
1	4164703	PUMP GP-F PRM-E
1	4387212	VALVE-CHECK
1	4398608	TUBE AS-FUEL
1	4577752	HOSE AS-FUEL
1	4931662	LINE AS-HYBRID
1	4936427	ADAPTER-CROSS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

Replace the fuel priming system in accordance with Engine News, M0069618, "A New Fuel Priming Pump Is Used On Certain C175-16 Locomotive Engines".

Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
0-18000 hrs, 0-80 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%