Gear Group (Rear)
Show/hide table
| |
| 图 1 | g03512216 |
Show/hide table
| 364-9106 后齿轮总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 327-2566 挡圈组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 2 | 1 | 229-1472 齿轮组件 | 将齿轮组件装配到发动机中，以便带机油通道塞的端部位于液压泵接头组件中，如图1所示。
用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 3 | 1 | 326-3849 泵齿轮组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 4 | 2 | 229-1476 接头组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 209-8624 衬套 的外径为 衬套的厚度为 安装深度为 |
|||
| 5 | 2 | 6V-5141 O 形密封圈 | 用油液稍微润滑即将密封的孔。 |
| 6 | 1 | 325-9668 惰轮组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 209-8621 轴承的外径为 衬套的厚度为 |
|||
| 7 | 1 | 209-9770 挡圈组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 8 | 1 | 207-8211 惰轮组件 | 用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 |
| 209-8621 轴承的外径为 衬套的厚度为 |
|||
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
Cat MT4400D AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Payload Configure
2014/06/27 New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks {7601, 7620}
2013/11/08 An Improved Commissioning Procedure is now Available for the 797F Off-Highway Truck {1000, 7000, 7961}
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100} 434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
24 Motor Graders Liquid Level Sensor
14L Motor Grader Electronic Control (Aftertreatment) - Remove and Install
C4.4 Industrial Engine Stopping the Engine
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Drive Shaft
725C, 725C2, 730C and 730C2 Articulated Truck Systems Calibrations (Cat ET)
2013/12/09 An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605} Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605}
994K Wheel Loader Service Center
C4.4 and C7.1 Engines Fuel Pressure Problem
14L Motor Grader Battery - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Twin Secondary Fuel Filter Base
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump