Electronic Unit Injector Mechanism
Show/hide table
图 1 | g03511856 |
Show/hide table
372-6469 喷油泵总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 8S-9191 螺栓 | 拧紧至扭矩为 |
2 | 1 | 230-3775 O 形密封圈 | 用按 50/50 比例混合的绿色 8T-2998 润滑剂和发动机机油稍微润滑密封圈。 |
3 | 1 | 230-3728 O 形密封圈 | 用按 50/50 比例混合的绿色 8T-2998 润滑剂和发动机机油稍微润滑密封圈。 |
Show/hide table
图 2 | g03511857 |
371-8891 喷油器总成 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
4 | 1 | 333-4871 弹簧 | 在测试力下的长度为 测试力为 测试后的自由长度为 |
5 | 4 | 283-8654 螺钉 | 拧紧至扭矩为 |
6 | 1 | 365-3386 单体喷油器喷嘴 | 用 Vactra No. 2 MSDS 5380 润滑螺纹。
拧紧至扭矩为 |
7 | 1 | 254-4379 喷嘴弹簧 | 在测试力下的长度为 测试力为 测试后的自由长度为 |
Show/hide table
图 3 | g03511877 |
298-5517 执行器组件 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
8 | 1 | 421-5853 平头螺钉 | 在装配前,将绿色 Loctite 290 涂覆到螺纹上。
拧紧至扭矩为 |
9 | 1 | 269-3183 电磁阀弹簧 | 在测试力下的长度为 测试力为 测试后的自由长度为 |
10 | 1 | 254-4376 垫片 | 选择垫片以提供 |
11 | 1 | 298-5534 螺母 | 拧紧至扭矩为 |
Caterpillar Information System:
Cat MT4400D AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Payload Configure
2014/06/27 New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks {7601, 7620}
2013/11/08 An Improved Commissioning Procedure is now Available for the 797F Off-Highway Truck {1000, 7000, 7961}
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100} 434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
24 Motor Graders Liquid Level Sensor
14L Motor Grader Electronic Control (Aftertreatment) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Event Codes
2014/06/03 A Field Procedure to Increase the Hydraulic Flow to the Hoist Cylinders on Certain 797F Off-Highway Trucks is Available {0679, 0738, 5051, 5057, 5066, 5069, 5070, 5073, 5117}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Assemble
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C4.4 Industrial Engine Stopping the Engine
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Drive Shaft
725C, 725C2, 730C and 730C2 Articulated Truck Systems Calibrations (Cat ET)
2013/12/09 An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)