C13, C15, and C18 Tier 4 Final Engines Caterpillar


Crankshaft

Usage:

826K 232


图 1g03512038

表 1
353-8013 曲轴总成的技术规格 
项目  数量  零件  技术规格说明 
253-1752 止推片  止推片只可用于中央主轴承上。 
在装配后,曲轴的端隙为 0.11 至 0.57 mm (0.004 至 0.022 in)


图 2g03512039

表 2
项目  数量  零件  技术规格说明 
4N-0684 定位销  曲轴端面上的定位销最大延伸量为 6.4 mm (0.25 in)。 
7S-5005 定位销  曲轴表面上的定位销延伸量为 4.1 ± 0.5 mm (0.16 ± 0.02 in)。 

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
Cat MT4400D AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Payload Configure
2014/06/27 New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks {7601, 7620}
2013/11/08 An Improved Commissioning Procedure is now Available for the 797F Off-Highway Truck {1000, 7000, 7961}
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100} 434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
24 Motor Graders Liquid Level Sensor
14L Motor Grader Electronic Control (Aftertreatment) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C4.4 Industrial Engine Stopping the Engine
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Drive Shaft
725C, 725C2, 730C and 730C2 Articulated Truck Systems Calibrations (Cat ET)
2013/12/09 An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605} Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605}
994K Wheel Loader Service Center
C4.4 and C7.1 Engines Fuel Pressure Problem
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.