2014/06/27 Caterpillar


New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks {7601, 7620}

Usage:

785D DMC
Off-Highway Truck/Tractor:
785D (S/N: DMC1-UP; MSY1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793D (S/N: FDB1-UP)
Service Magazine SEPD1715, 20 December 2013, "New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks ". Disregard this article. Refer to Service Magazine, SEPD1805, 24 June 2014, " New Monitor Software Is Now Available for VIMS ABL2M ECM on Certain Cat® Off-Highway Trucks/Tractors".

Description of Change: New VIMS ABL Software Is Now Available for use on certain Off-Highway trucks.

Improvements and Enhancements

  • Corrected trigger conditions for event 13024 (Low Brk/Air Pressure)

  • The MP# for Total Fuel parameter has been changed to 807 instead of 187

Adaptable To: The part numbers for the new software are listed in the below Table 1:

Table 1
New Software    
Sales Model     Qty     New Part Number     Description     Application     Language    
793D     1     451-8439     Monitor Software Gp     Standard/High Altitude     English/Spanish    
1 451-8440     Monitor Software Gp     Standard/High Altitude     English/Russian    
1 451-8441     Monitor Software Gp     Standard/High Altitude     English/Portuguese    
1 451-8442     Monitor Software Gp     Standard/High Altitude     English/Swedish    
1 451-8443     Monitor Software Gp     Standard/High Altitude     English/Mongolian    
785D     1     451-8444     Monitor Software Gp     Standard     English/Spanish    
1 451-8445     Monitor Software Gp     Standard     English/Russian    
1 451-8446     Monitor Software Gp     Standard     English/Norwegian    
1 451-8447     Monitor Software Gp     Standard     English/Finnish    
789D     1     451-8448     Monitor Software Gp     Standard     English/Spanish    
1 451-8449     Monitor Software Gp     Standard     English/Russian    
1 451-8450     Monitor Software Gp     Standard     English/portugese    
The new software is adaptable to and is effective in production with the serial number prefixes that are listed in Table 2:

Table 2
Sales Model     Adaptable Serial Number     Effective Serial Numbers    
785D     S/N:MSY1-609
S/N:DMC1-UP    
S/N:MSY610-UP    
789D     S/N:SPD1-612
S/N:SHH1-UP    
S/N:SPD613-UP    
793D     S/N:FDB1-1813     S/N:FDB1814-UP    

Caterpillar Information System:

2013/11/08 An Improved Commissioning Procedure is now Available for the 797F Off-Highway Truck {1000, 7000, 7961}
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100} 434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
24 Motor Graders Liquid Level Sensor
14L Motor Grader Electronic Control (Aftertreatment) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Event Codes
2014/06/03 A Field Procedure to Increase the Hydraulic Flow to the Hoist Cylinders on Certain 797F Off-Highway Trucks is Available {0679, 0738, 5051, 5057, 5066, 5069, 5070, 5073, 5117}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Assemble
Field Procedure to Increase the Hydraulic Flow to the Hoist Cylinders on Certain 797F Off-Highway Trucks{0679, 0738, 5051, 5057, 5066, 5069, 5070, 5073, 5117} Field Procedure to Increase the Hydraulic Flow to the Hoist Cylinders on Certain 797F Off-Highway Trucks{0679, 0738, 5051, 5057, 5066, 5069, 5070, 5073, 5117}
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Relief Valve (Transmission Hydraulic Control) - Disassemble
Cat MT4400D AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Payload Configure
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C4.4 Industrial Engine Stopping the Engine
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Drive Shaft
725C, 725C2, 730C and 730C2 Articulated Truck Systems Calibrations (Cat ET)
2013/12/09 An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.