Water Pump
Show/hide table
| |
| 图 1 | g03511978 |
Show/hide table
| 374-4753 水泵总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 371-6782 泵叶轮 | 叶轮的安装深度 (B) 为 |
| 3 | 1 | 352-2002 水泵齿轮 | 压装水泵齿轮，直至水泵齿轮与轴承 (2) 平齐。 |
| 4 | 1 | 203-3831 杯塞 | 杯塞在机加工表面的最大安装深度为 |
| 5 | 1 | 153-1256 唇形密封 | 安装唇形密封时，使主密封唇朝向水泵主动齿轮。 用压力机压装油封，直至油封与壳体端面平齐，如图 1 中所示。
使用安装工具。 请勿用手安装唇形密封。 |
| 6 | 1 | 336-2212 水泵密封组件 | 将水泵密封组件压装到轴上，直到杯完全座入泵壳体内。 使用安装工具。
安装高度 (D) 为 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
Cat MT4400D AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Payload Configure
2014/06/27 New VIMS ABL Software Is Now Used On Certain Off-Highway Trucks {7601, 7620}
2013/11/08 An Improved Commissioning Procedure is now Available for the 797F Off-Highway Truck {1000, 7000, 7961}
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100} 434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
24 Motor Graders Liquid Level Sensor
14L Motor Grader Electronic Control (Aftertreatment) - Remove and Install
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Event Codes
2014/06/03 A Field Procedure to Increase the Hydraulic Flow to the Hoist Cylinders on Certain 797F Off-Highway Trucks is Available {0679, 0738, 5051, 5057, 5066, 5069, 5070, 5073, 5117}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C4.4 Industrial Engine Stopping the Engine
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Drive Shaft
725C, 725C2, 730C and 730C2 Articulated Truck Systems Calibrations (Cat ET)
2013/12/09 An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605} Cat ® Fleet Onboard Software Version 3.1 Locks Up{7605}