Temperature Sensor (Catalyst Inlet) - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | LOCTITE C5-A Copper Antiseize | - |
- Cut cable strap (1). Remove sensor (2).
Show/hide table
Illustration 2 g03499600 - Cut cable straps (3) and (4).
Show/hide table
Illustration 3 g03504791 - Remove panel (5).
Show/hide table
Illustration 4 g03499601 - Cut cable straps (6), (7), and (8).
Show/hide table
Illustration 5 g03499603 - Disconnect harness assembly (9). Cut cable strap (10). Remove temperature sensor assembly (11).
Show/hide table
| |
| Illustration 1 | g03499598 |
- Install temperature sensor assembly (11) in the reverse order of removal.
- Apply Tooling (A) to the threads of temperature sensor (2).
- Tighten temperature sensor (2) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) .
Caterpillar Information System:
Installation of the 351-8997 Air Lines Gp for Certain 797F Off-Highway Truck Engines{1071} Installation of the 351-8997 Air Lines Gp for Certain 797F Off-Highway Truck Engines{1071}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Steering Neutralizer Valve - Remove and Install
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Main
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Power Train System)
994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961} 994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961}
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
Cat® Terrain v5 for Grading and Loading Truck Load Windows
14L Motor Grader Pressure Sensor (DPF) - Remove and Install
14L Motor Grader Clean Emissions Module - Remove and Install
770G and 772G Off-Highway Truck Systems Control Manifold (Steering) - Test and Adjust
770G and 772G Off-Highway Truck Systems Piston Pump (Steering) Pressure - Test and Adjust
2014/01/14 A New Torsional Coupling Assembly and Flywheel Is Now Used on Certain 14M and 16M Motor Graders {3252, 3279}
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
994K Wheel Loader Stairway (Powered) Operation - If Equipped
2013/11/21 New Ether Aid Line Components Are Used On Certain C175 Off-Highway Truck Engines {1456}
770G and 772G Off-Highway Truck Systems Rear Suspension (Cylinder) - Purge and Charge
14L Motor Grader Engine - Remove and Install
770G and 772G Off-Highway Truck Systems Front Suspension (Cylinder) - Purge and Charge
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Remove" for Certain R1600G and R1600H Load Haul Dump Machines {4267}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Disassemble" for Certain R1600G Load Haul Dump Machines {4267}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Assemble" for Certain R1600G Load Haul Dump Machines {4267}