Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
- Remove panel (1).
Show/hide table
Illustration 1 | g03504339 |
- Cut cable strap (3). Disconnect harness assembly (2). Remove solenoid valve (4).
Show/hide table
Illustration 3 g03515138 Note: Cleanliness is an important factor. Before the disassembly procedure, clean the exterior of the component thoroughly. This action will help to prevent dirt from entering the internal mechanism.
- Remove nut (9), washer (8), and solenoid (7) from valve assembly (4).
- Remove cartridge assembly (6) and remove O-ring seals (5).
Show/hide table
Illustration 2 | g03499491 |
- Install solenoid valve (4) in the reverse order of removal.
- Tighten cartridge assembly (6) to a torque of
50 ± 5 N·m (37 ± 4 lb ft) . - Tighten nut (9) to a torque of
20 ± 2.5 N·m (177 ± 22 lb in) .
- Tighten cartridge assembly (6) to a torque of
Caterpillar Information System:
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Main
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Power Train System)
994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961} 994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961}
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
Cat® Terrain v5 for Grading and Loading Truck Load Windows
14L Motor Grader Pressure Sensor (DPF) - Remove and Install
14L Motor Grader Clean Emissions Module - Remove and Install
2013/10/25 Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Brake System)
Comfort Series Seat For Caterpillar Machines Troubleshooting
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Steering Neutralizer Valve - Remove and Install
Installation of the 351-8997 Air Lines Gp for Certain 797F Off-Highway Truck Engines{1071} Installation of the 351-8997 Air Lines Gp for Certain 797F Off-Highway Truck Engines{1071}
14L Motor Grader Temperature Sensor (Catalyst Inlet) - Remove and Install
770G and 772G Off-Highway Truck Systems Control Manifold (Steering) - Test and Adjust
770G and 772G Off-Highway Truck Systems Piston Pump (Steering) Pressure - Test and Adjust
2014/01/14 A New Torsional Coupling Assembly and Flywheel Is Now Used on Certain 14M and 16M Motor Graders {3252, 3279}
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
994K Wheel Loader Stairway (Powered) Operation - If Equipped
2013/11/21 New Ether Aid Line Components Are Used On Certain C175 Off-Highway Truck Engines {1456}
770G and 772G Off-Highway Truck Systems Rear Suspension (Cylinder) - Purge and Charge
14L Motor Grader Engine - Remove and Install
770G and 772G Off-Highway Truck Systems Front Suspension (Cylinder) - Purge and Charge