Steering Cylinder
Show/hide table
Illustration 1 | g03346205 |
Show/hide table
Specification for 395-9491 Steering Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | -     | -     | Cylinder bore is 101.6 mm (4.00 inch).     |
2     | -     | -     | Rod diameter is 63.5 mm (2.50 inch).     |
-     | -     | -     | Stoke is 304.8 mm (12.00 inch).     |
Caterpillar Information System:
MH3049 Material Handler Machine System Stick - 8.001 m (26.2500 ft)
MH3049 Material Handler Machine System Upper Frame
MH3049 Material Handler Machine System Tire and Rim
R1600G Load Haul Dump Steering System Steering Time - Check - STIC Steering
R1600G Load Haul Dump Steering System Steering System Pressure - Test and Adjust
2013/05/06 Improved Barrel Now Used on the Tilt Cylinder on Certain R2900G Load Haul Dump Machines {5104}
Command for Underground General Information (Machine Automation System)
MH3049 Material Handler Air Conditioning and Heating Control
MH3049 Material Handler Machine Systems Pump Drive Group - Assemble
An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068} An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068}
2013/02/25 A New O-Ring Seal Is Now Used for the Wheel and Brake Group on Certain Large Off-Highway Trucks {4006, 4251, 7555}
2570C and 2670C Wheel Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
MH3049 Material Handler Machine System Hydraulic Cylinder
MH3049 Material Handler Machine System Hydraulic Cylinder
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
MH3049 Material Handler Machine System Counterweight and Mounting
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Hydraulic Tank - Disassemble
C9.3 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
MH3049 Material Handler Hydraulic System Hydraulic Tank and Filter