NOTICE |
---|
Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
Illustration 1 | g03346361 |
Typical example |
(1) Tighten the bolts to an initial torque. ...
Illustration 2 | g03346360 |
Typical example |
Tighten the bolts in the sequence that is in illustration 2. Tighten the bolts to the following torque. ...
Illustration 3 | g03346381 |
Typical example |
Illustration 4 | g03348191 |
Typical example |
(2) Tighten the bolts to the following torque. ...
(3) Tighten the fasteners to the following torque. ...
(4) Tighten the bolts to the following torque. ...
Note: The fasteners (2), (3), and (4) should be tightened in the sequence that is shown in illustration 4
Illustration 5 | g03348225 |
Typical example |
(5) Tighten the bolts to the following torque. ...