MH3049 Material Handler Machine System Caterpillar


Upper Frame

Usage:

MH3049 HPB



Illustration 1g03346181

Table 1
Specification for 395-8014 Upper Frame    
Item     Qty     Part     Specification Description    
Mounting faces of the hub, wheel nuts, washers, and wheel mounting surfaces must be clean and free of foreign material.    
Remove all debris from the bolted joint surface and decrease with brake cleaner.    
Clean all machined threads in the bolted joint and bolt threads with brake cleaner. Allow to dry.    
1     33     174-6480 Bolt     Use the following procedure in spiral pattern:
1. Apply moly to the bolt threads and both sides of washer surface.
2. Hand tighten the bolts.
3. Tighten bolts to
820 N·m (605 lb ft).    

Caterpillar Information System:

MH3049 Material Handler Machine System Tire and Rim
R1600G Load Haul Dump Steering System Steering Time - Check - STIC Steering
R1600G Load Haul Dump Steering System Steering System Pressure - Test and Adjust
2013/05/06 Improved Barrel Now Used on the Tilt Cylinder on Certain R2900G Load Haul Dump Machines {5104}
Command for Underground General Information (Machine Automation System)
MH3049 Material Handler Air Conditioning and Heating Control
MH3049 Material Handler Machine Systems Pump Drive Group - Assemble
An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068} An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068}
2013/02/25 A New O-Ring Seal Is Now Used for the Wheel and Brake Group on Certain Large Off-Highway Trucks {4006, 4251, 7555}
2570C and 2670C Wheel Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
2570C and 2670C Wheel Feller Bunchers Engine Starting with Auxiliary Start Receptacle - If Equipped
MH3049 Material Handler Machine System Stick - 8.001 m (26.2500 ft)
MH3049 Material Handler Machine System Steering Cylinder
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
MH3049 Material Handler Machine System Hydraulic Cylinder
MH3049 Material Handler Machine System Hydraulic Cylinder
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
MH3049 Material Handler Machine System Counterweight and Mounting
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Hydraulic Tank - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.