Tire and Rim
Show/hide table
Illustration 1 | g03346178 |
Right side view |
Show/hide table
Specification for 395-8395 Tire Gp     | |||
Item     | Qty     | Part     | Specification Description     |
Mounting faces of the hub, wheel nuts, washers, and wheel mounting surfaces must be clean and free of foreign material.     | |||
1     | 96     | 7X-2563 Bolt     | Use the following procedure to tighten the bolt 1 through bolt 24 in the numerical as shown in the Illustration 1 on each tire and rim: 1. Hand tighten the bolts. 2. Tighten the bolts to 204 ± 7 N·m (150 ± 5 lb ft). 3. Again tighten the bolts to 407 ± 13 N·m (300 ± 9 lb ft). 4. Again finally tighten bolts to 611 ± 19 N·m (450 ± 14 lb ft).     |
Caterpillar Information System:
R1600G Load Haul Dump Steering System Steering Time - Check - STIC Steering
R1600G Load Haul Dump Steering System Steering System Pressure - Test and Adjust
2013/05/06 Improved Barrel Now Used on the Tilt Cylinder on Certain R2900G Load Haul Dump Machines {5104}
Command for Underground General Information (Machine Automation System)
MH3049 Material Handler Air Conditioning and Heating Control
MH3049 Material Handler Machine Systems Pump Drive Group - Assemble
An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068} An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068}
2013/02/25 A New O-Ring Seal Is Now Used for the Wheel and Brake Group on Certain Large Off-Highway Trucks {4006, 4251, 7555}
2570C and 2670C Wheel Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
2570C and 2670C Wheel Feller Bunchers Engine Starting with Auxiliary Start Receptacle - If Equipped
C7.1 Engines for Caterpillar Built Machines Piston and Rings
MH3049 Material Handler Machine System Upper Frame
MH3049 Material Handler Machine System Stick - 8.001 m (26.2500 ft)
MH3049 Material Handler Machine System Steering Cylinder
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
MH3049 Material Handler Machine System Hydraulic Cylinder
MH3049 Material Handler Machine System Hydraulic Cylinder
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
MH3049 Material Handler Machine System Counterweight and Mounting
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump