Pump Drive Group - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| B | 1P-5010 | Bearing and Seal Driver Gp. | 1 |
| D | 8S-9968 | Ram Adapter | 1 |
| E | Loctite High Flex GM | - | |
- Install sleeve (21) .
Show/hide table
 | |
| Illustration 1 | g03346046 |
- Install keys (20) and (19) .
Show/hide table
 | |
| Illustration 2 | g03346048 |
- Use Tooling (D) in order to install shaft (17) into gear (18) .
Show/hide table
 | |
| Illustration 3 | g03346050 |
- Install retainer (15) .
Show/hide table
 | |
| Illustration 4 | g03346058 |
- Install bearings (16) and (14) .
Show/hide table
 | |
| Illustration 5 | g03346060 |
- Install seal (13) .
Show/hide table
 | |
| Illustration 6 | g03346066 |
- Install shaft assembly (12) .
Show/hide table
 | |
| Illustration 7 | g03346073 |
- Install adapter (11) .
Show/hide table
 | |
| Illustration 8 | g03346074 |
- Using the measurements that you recorded during disassembly, install coupler (10). Install bolts (9) to a torque of 27 N·m (20 lb ft). Then tighten bolts to a torque of 40 N·m (30 lb ft). Then tighten bolts (9) to a final torque of 68 N·m (50 lb ft).
Show/hide table
 | |
| Illustration 9 | g03346081 |
- Install keys (8) and (7) .
Show/hide table
 | |
| Illustration 10 | g03346082 |
- Use Tooling (B) and (C) and a suitable press in order to install shaft (6) .
Show/hide table
 | |
| Illustration 11 | g03346090 |
- Install bearings (5) and (5A) .
Show/hide table
 | |
| Illustration 12 | g03346092 |
- Install gear assembly (4) and retainer (3) .
Show/hide table
 | |
| Illustration 13 | g03346096 |
- Install cover (2) and bolts (1) .
Show/hide table
 | |
| Illustration 14 | g03346098 |
End By: Install pump drive group.
Caterpillar Information System:
An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068} An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat ® Machines {3004, 3067, 5056, 5068}
2013/02/25 A New O-Ring Seal Is Now Used for the Wheel and Brake Group on Certain Large Off-Highway Trucks {4006, 4251, 7555}
2570C and 2670C Wheel Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
2570C and 2670C Wheel Feller Bunchers Engine Starting with Auxiliary Start Receptacle - If Equipped
C7.1 Engines for Caterpillar Built Machines Piston and Rings
C9.3 Head Tool Improvements{0599, 0701, 0703, 1100} C9.3 Head Tool Improvements{0599, 0701, 0703, 1100}
MH3049 Material Handler Machine System Tire and Rim
MH3049 Material Handler Machine System Stick Cylinder
MH3049 Material Handler Machine System Stabilizer Cylinders
MH3049 Material Handler Machine System Boom Cylinder
MH3049 Material Handler Machine System Stabilizer
MH3049 Material Handler Air Conditioning and Heating Control
Command for Underground General Information (Machine Automation System)
2013/05/06 Improved Barrel Now Used on the Tilt Cylinder on Certain R2900G Load Haul Dump Machines {5104}
R1600G Load Haul Dump Steering System Steering System Pressure - Test and Adjust
R1600G Load Haul Dump Steering System Steering Time - Check - STIC Steering
MH3049 Material Handler Machine System Tire and Rim
MH3049 Material Handler Machine System Upper Frame
MH3049 Material Handler Machine System Stick - 8.001 m (26.2500 ft)
MH3049 Material Handler Machine System Steering Cylinder
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
MH3049 Material Handler Machine System Hydraulic Cylinder