9U5839 Liquid Gasket Material Available For Use With Aluminum {0649,0648}
Usage:
New 9U5839 Liquid Gasket Material is available for use with aluminum. This new liquid gasket material does NOT cause degradation of aluminum. This new liquid gasket material is contained in a 4 ounce collapsible tube and is 80 percent (by weight) Acetone. The 9U5839 Liquid Gasket Material is flammable and should be used only in a well ventilated area. The 9U5839 Liquid Gasket Material can be used in place of 7M7260 Liquid Gasket Material in any application.
The 7M7260 Liquid Gasket Material should NOT be used on aluminum. The 7M7260 Liquid Gasket Material is 90 percent (by weight) 1, 1, 1 Trichloroethane which can cause aluminum degradation. The 7M7260 Liquid Gasket Material can be used on non-aluminum applications.
Caterpillar Information System:
1992/04/06 Procedure For Putting 9U5839 Liquid Gasket Material On Cylinder Liner {1216}
1992/03/23 New Utility Voltage Pickup And Dropout Adjustment Range For Contactor Type Automatic Transfer Switches {4450}
1992/03/23 Rotor Shaft Length Changed {4457,4472}
1992/03/23 Turbocharger Bearings Available For Garrett (Formerly AiResearch) Turbochargers Changed {1053}
1992/03/23 New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability {1905,1911}
1992/03/23 Troubleshooting Electrical Noise Problems {1900}
1992/03/23 Unit Injector Test Specifications Have Been Updated {0374,1290}
1992/03/09 New Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat {1307}
1992/03/02 Fuse Blocks Have Been Improved And Are Now Serviced{4450}
1992/03/02 New Combustion Seal (O-Ring Seal) Used In Unit Injection Pump Group{1290}
1992/03/02 Procedure To Repair Oil Leak At Rear Camshaft Cover{1221}
1992/02/24 Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/04/06 Engine Oil Recommendations Have Been Changed {0374,1300}
1992/04/06 New Caterpillar Engine Oil Nomenclature {0374,0645,1300}
1992/04/06 New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06 New And Improved Operation And Maintenance Manuals Available {0374}
1992/04/06 New Turbocharger Groups With Ceramic Turbine Wheels Used {1052}
1992/04/06 High Capacity Oil Pan Available {1302}
1992/04/06 New Bracket Assembly Added To Exhaust Manifold Group {1059}
1992/04/13 New Cylinder Kits Available{1213}
1992/04/13 Be Sure 8N2001 Oil Filter Base Is Correctly Installed{1306}
1992/04/20 New Spring Used In Governor Control Groups{1265}
1992/04/20 Changed Pictograph Symbols For EMS and CMS{7490,7400}
1992/04/20 Newer Oil Formulations For Caterpillar Engines{0374,1300}