1992/03/02 Caterpillar


Fuse Blocks Have Been Improved And Are Now Serviced{4450}

Usage:


All SR4 Generators With VR3 Voltage Regulators

Description of Change: The improved fuse block will provide better clamping action on the fuse ferrules. The improved fuse block is a serviceable part.

Adaptable To: The improved 4P9826 Fuse Block is adaptable to all VR3 Voltage Regulators.

Caterpillar Information System:

1992/03/02 New Combustion Seal (O-Ring Seal) Used In Unit Injection Pump Group{1290}
1992/03/02 Procedure To Repair Oil Leak At Rear Camshaft Cover{1221}
1992/02/24 Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/24 1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/17 New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17 New Cylinder Head Gasket Used{1124,1100,1101}
1992/02/17 New 100 Amp Alternators Available For Applications With Large Electrical Requirements{1405}
1992/02/10 Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10 The Letter "I" Now Used In Part Numbers{0374}
1992/02/03 Many Commercial Folded Core Radiators Can Be Converted To Multiple Row Module Radiators{1353}
1992/02/03 New Oil Filler Tube Assembly Helps Prevent Cracking{1316}
1992/02/03 Oil Capacity Increased{1302,1326}
1992/03/09 New Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat {1307}
1992/03/23 Unit Injector Test Specifications Have Been Updated {0374,1290}
1992/03/23 Troubleshooting Electrical Noise Problems {1900}
1992/03/23 New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability {1905,1911}
1992/03/23 Turbocharger Bearings Available For Garrett (Formerly AiResearch) Turbochargers Changed {1053}
1992/03/23 Rotor Shaft Length Changed {4457,4472}
1992/03/23 New Utility Voltage Pickup And Dropout Adjustment Range For Contactor Type Automatic Transfer Switches {4450}
1992/04/06 Procedure For Putting 9U5839 Liquid Gasket Material On Cylinder Liner {1216}
1992/04/06 9U5839 Liquid Gasket Material Available For Use With Aluminum {0649,0648}
1992/04/06 Engine Oil Recommendations Have Been Changed {0374,1300}
1992/04/06 New Caterpillar Engine Oil Nomenclature {0374,0645,1300}
1992/04/06 New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.