Atmospheric Pressure Sensor - Remove and Install
拆卸步骤
- 拆卸大气压力传感器可能需要拆下电子控制模块(ECM)。 如有必要,拆下电子控制模块。 有关正确步骤,请参阅拆解和组装, "电子控制模块 - 拆卸和安装"。
Show/hide table
图 1 | g02315313 |
- 将锁片 (2) 滑入解锁位置。 断开线束组件 (1) 。
- 将大气压力传感器 (3) 从 ECM 支架上拆下。
安装步骤
- 将大气压力传感器 (3) 安装到 ECM 支架上。 将大气压力传感器 (3) 拧紧至扭矩为 10 N·m (89 lb in)。
注: 不得使用 O 形密封圈安装大气压力传感器。
Show/hide table
图 2 | g02315313 |
- 将线束组件 (1) 连接到大气压力传感器 (3) 上。 将锁片 (2) 滑动到锁定位置。
- 如果根据需要拆下了 ECM,安装 ECM。 有关正确步骤,请参阅拆解和组装, "电子控制模块 - 拆卸和安装"。
Caterpillar Information System:
C7.1 Industrial Engine Refrigerant Compressor - Remove and Install
2012/08/21 A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
C7.1 Industrial Engine Crankshaft Gear - Remove and Install
C7.1 Industrial Engine Crankshaft Timing Ring - Remove and Install
C7.1 Industrial Engine Crankshaft - Install
C7.1 Industrial Engine Crankshaft - Remove
C7.1 Industrial Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
Comfort Series Seat For Caterpillar Machines Seat Maintenance Interval Schedule
C7.1 Industrial Engine Connecting Rod Bearings - Install - Connecting rods in position
C7.1 Industrial Engine Connecting Rod Bearings - Remove - Connecting rods in position
C7.1 Industrial Engine Pistons and Connecting Rods - Install
C7.1 Industrial Engine Pistons and Connecting Rods - Assemble
C7.1 Industrial Engine Camshaft Position Sensor - Remove and Install
C7.1 Industrial Engine Crankshaft Position Sensor - Remove and Install
CB44B Vibratory Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Mechanical , Split Drum
521B and 522B Track Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw) - Remove and Install
C7.1 Industrial Engine Coolant Temperature Sensor - Remove and Install
C7.1 Industrial Engine Engine Oil Pressure Sensor - Remove and Install
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install
C7.1 Industrial Engine Soot Antenna - Remove and Install
C7.1 Industrial Engine Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C7.1 Industrial Engine Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
C7.1 Industrial Engine Boost Pressure Sensor - Remove and Install
C7.1 Industrial Engine Inlet Manifold Temperature Sensor - Remove and Install