New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
Usage:
3500 Family Of Engines
Reference: Guideline For Salvage Operations, SEBF8145-01, "Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert - 3500 Family of Engines".
A new video cassette tape is available to assist the service technician in the correct procedure to counterbore the top deck of a cylinder block and install a new liner insert. The video will help address the concerns a dealer may have regarding this procedure, and is intended to be used with the Reference. "Procedure To Counterbore Top Deck Of Cylinder Block And Install Liner Insert - 3500 Family Of Engines", SEVN1962, is available through normal literature ordering channels.
Caterpillar Information System:
1991/07/08 Larger Washer And Longer Bolt Used On Magneto Mounting Flange{1552,1556}
1991/07/08 New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08 Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed{1901,0782,1257,1908,7557}
1991/07/08 New Dual Service Program Module (SPM) Available{1901}
1991/07/08 Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08 Caterpillar Original Equipment White And Yellow Paint Is Available In Aerosol Cans For Touch-Up Purposes{0652,7559,7581}
1991/07/01 Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01 New Exhaust Manifold Gasket Available{1059}
1991/07/01 New Thermostatic Switches Used In Air Conditioning Systems{7320}
1991/06/24 Correct Adjustment And Installation Procedure For Engine Speed Timing Sensor{1912}
1991/06/24 New Aftercooler Core Assembly With Increased Corrosion Resistance Available As An Attachment For Landfill Applications{1064}
1991/06/24 New Flame Arrestor Assembly Used In Flame Arrestor Group{1050}
1991/07/22 New Throttle Actuator In Governor Groups Improves Engine Stability {1289}
1991/07/22 New Return Spring Used In Unit Injectors {1290}
1991/07/22 New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures {1052}
1991/08/12 Do Not Use RTV Sealant On Valve Cover Gaskets{1107,1120,7555}
1991/08/26 New Hose Used To Connect Turbocharger Compressor Outlet To Air To Air Aftercooler (ATAAC) Inlet Tubing {1052,1063}
1991/08/26 Initial Valve Lash Checking Interval Changed {1105}
1991/08/26 New Water Temperature Regulator (With Internal Vent Valve), Regulator Housing, Pipe, And Gasket In Water Lines Group {1355}
1991/08/26 New Exhaust Manifolds And Wastegate Mounting Used On 3508 (2JF), 3512 (4KC), 3516 (3RC) SI Industrial Engines {1059,1057,1065}
1991/08/26 Rectifier and Suppressor Changes to 807, 808, 809 and 815 Frame Generators {4465,4466}
1991/08/26 New Fuel Injection Lines Used On 3306B (63Z) Truck Engines {1252}
1991/09/02 Always Use A Digital Voltmeter For Battery Testing{0785,0709,1401,7468}
1991/09/02 Service Tips For Turbocharger Removal And Installation{1052}