Caterpillar Original Equipment White And Yellow Paint Is Available In Aerosol Cans For Touch-Up Purposes{0652,7559,7581}
Usage:
Reference: Service Magazine; June 15, 1987; Page 1; "Caterpillar Original Equipment Paint Products (U.S. and Canada)."
Caterpillar paint is available in aerosol cans for touch-up and repair purposes. Order 4C4203 White Paint or 4C4200 Yellow Paint from Caterpillar Service Technology Group through the parts system. Or, inside U.S. and Canada, order part number AR11-W143A White Paint or AR11-C106A Yellow Paint from Moline Paint Manufacturing Co.
5400 Twenty-Third Avenue
Moline, IL 61265 (USA)
Telephone: (309) 762-9604
Caterpillar Information System:
1991/07/01 Larger 7N1308 Secondary Air Filter Can Be Used In Place Of 1P8482 Secondary Air Filter{1054}
1991/07/01 New Exhaust Manifold Gasket Available{1059}
1991/07/01 New Thermostatic Switches Used In Air Conditioning Systems{7320}
1991/06/24 Correct Adjustment And Installation Procedure For Engine Speed Timing Sensor{1912}
1991/06/24 New Aftercooler Core Assembly With Increased Corrosion Resistance Available As An Attachment For Landfill Applications{1064}
1991/06/24 New Flame Arrestor Assembly Used In Flame Arrestor Group{1050}
1991/06/24 Air Starter Relay Valve Improved{1462}
1991/06/17 New Top Piston Ring Improves Wear Resistance{1215}
1991/06/17 New Gasket Used In Flywheel Housing Cover Group{1157}
1991/06/17 Personality Modules For 1991{1902}
1991/06/17 New Seal And Improved Plate Eliminate Leaks In BrakeSaver Water Lines Group{1380,1155}
1991/06/17 New Three-Ring Pistons And New Rings Used In New Piston And Rod Groups To Provide Improved Oil Control{1214,1215}
1991/07/08 Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08 New Dual Service Program Module (SPM) Available{1901}
1991/07/08 Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed{1901,0782,1257,1908,7557}
1991/07/08 New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08 Larger Washer And Longer Bolt Used On Magneto Mounting Flange{1552,1556}
1991/07/22 New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22 New Throttle Actuator In Governor Groups Improves Engine Stability {1289}
1991/07/22 New Return Spring Used In Unit Injectors {1290}
1991/07/22 New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures {1052}
1991/08/12 Do Not Use RTV Sealant On Valve Cover Gaskets{1107,1120,7555}
1991/08/26 New Hose Used To Connect Turbocharger Compressor Outlet To Air To Air Aftercooler (ATAAC) Inlet Tubing {1052,1063}
1991/08/26 Initial Valve Lash Checking Interval Changed {1105}