D6T Track-Type Tractor Power Train Caterpillar


Transmission and Bevel Gears - Connect

Usage:

D6T XW CG8

Connection Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  138-7575  Link Bracket 
B  1P-2420  Transmission Repair Stand 


    Illustration 1g00839095

  1. Inspect the O-ring seals. If necessary, replace the O-ring seals. Position the O-ring seals on the transmission.

  2. Install Tooling (A) on the transfer and bevel gears. Attach a hoist to Tooling (A). Lower transfer and bevel gears (1) onto transmission (2). The weight of transfer and bevel gears (1) is approximately 385 kg (850 lb).

  3. Install four bolts (3) that fasten the bevel gear to the transmission.


    Illustration 2g02139499

  4. Connect harness assemblies (7). Install cable straps (7).


    Illustration 3g02139497

  5. Install cover (5). Install bolts (4) and the washers.

  6. Remove the transmission and bevel gear from Tooling (B). Remove Tooling (A). The weight of the transmission and bevel gear is approximately 840 kg (1850 lb).

End By:

  1. Install the transmission and bevel gear.

Caterpillar Information System:

D6T Track-Type Tractor Power Train Transmission and Bevel Gears - Separate
Troubleshooting Guide for 740 Ejector Manifold{5050, 5264} Troubleshooting Guide for 740 Ejector Manifold{5050, 5264}
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Service Brake System
D6T Track-Type Tractor Power Train Torque Converter - Assemble
D6T Track-Type Tractor Power Train Torque Converter - Disassemble
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Tailgate Cylinder
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Ejector Cylinder
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Ejector Manifold
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Ejector Control Valve
2015/04/15 A New Hose Assembly Is Now Used in the Hoist Oil Lines Group and Water Lines Group on Certain Off-Highway Trucks {1380, 5057}
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Ejector System
793F Series AC Off-Highway Truck/Tractor Power Train Electronic Control System System Schematic
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Service Brake
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Parking Brake
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Brake Control Valve (Service)
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Brake Accumulator (Service)
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Parking Brake System
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Brake Control Valve (Parking)
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Brake Accumulator (Parking)
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Suspension System
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System Electronic Control Module
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Suspension Cylinder (Front)
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System Electrical Output Components
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System Data Link
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.