Illustration 1 | g01880626 |
Press the mode button (3) in order to access the configuration screen for the valve speed from the AccuGrade run time screen. This screen allows an operator to manually adjust the speed that the control system responds. The choices for this screen represent a percentage from 10 to 200, in 10 percent increments. The default value is 100 percent. A lower number causes a slower response and a higher number causes a faster response.
When this screen is entered, "V Speed" will be displayed. The current setting will be displayed the first time the up arrow button (1) or the down arrow button (2) is pressed. Each subsequent button press will change the setting by 5. After the setting has not changed for 2 seconds, then the current value that is chosen by an operator will flash on the screen once and will be set in the system. If the mode button (3) is pressed prior to the 2 second timer expiring, then the new setting will be accepted and configured in the AccuGrade system.