Log Loader Pillar Base Mounting Bolts - Inspect/Replace/Tighten
Show/hide table
Illustration 1 | g01907075 |
Log Loader Pillar Mounting Bolts |
Inspect the mounting bolts for abnormal wear. There are a total of eight mounting bolts.
Check the torque of the bolts. The torque for the mounting bolts is 1120 N·m (825 lb ft).
Note: If the mounting bolts can be turned more than 60 degrees in order to reach the proper torque, replace all eight bolts.
PAK00280-UP, ; PBK00268-UP
Show/hide table
Illustration 2 | g02774657 |
Log loader pillar mounting bolts for Epsilon crane PAK00280-UP, PBK00268-UP |
Inspect the mounting bolts for abnormal wear. There are a total of 14 mounting bolts.
Check the torque of the bolts. The torque for the mounting bolts is 1220 N·m (900 lb ft).
Note: If the mounting bolts can be turned more than 60 degrees in order to reach the proper torque, replace all 14 bolts.
Caterpillar Information System:
584 and 584HD Forwarders Log Loader Pillar Base - Lubricate
584 and 584HD Forwarders Log Loader Grapple Pivot Pins - Lubricate
584 and 584HD Forwarders Log Loader Grapple Mounting Bolts - Check/Tighten
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Modes of Operation
584 and 584HD Forwarders Log Loader Extendable Stick Bearings - Inspect
584 and 584HD Forwarders Log Loader Extendable Stick - Lubricate
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader System Components
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Valve Speed - Set
793F Off-Highway Truck Differential and Final Drive Oil Level - Check
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
584 and 584HD Forwarders Log Loader Pillar Base Oil - Change
584 and 584HD Forwarders Log Loader Pillar Base Oil Level - Check
584 and 584HD Forwarders Log Loader Pivot Bearings - Lubricate
584 and 584HD Forwarders Machine System Pressures - Test/Adjust
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061} Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
2009/05/04 New Hydraulic Tubes are Available on Certain 16M Motor Graders {4257, 4263, 5057}
793F Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
797 and 797B Off-Highway Truck/Tractor Engine Air Filter Secondary Element - Replace
584 and 584HD Forwarders Cab Filter (Recirculation) - Clean/Inspect/Replace
584 and 584HD Forwarders Hydraulic System Monitoring and Control System
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 03