Log Loader Pillar Base - Lubricate
Show/hide table
Use a stable work platform placed in a secure location when lubricating the pillar, working on the fuel tank, or working on the hydraulic tank. If a secure location is not available, use the appropriate safety equipment to prevent falling off of the machine. Failure to work from a secure location may result in injury or death from a slip or a fall. |
Show/hide table
Illustration 1 | g02732745 |
Wipe off all of the fittings on the pillar base before any lubricant is applied.
Apply 5P-0960 Molybdenum Grease through two fittings that are on each side of the pillar base. There is a total of two fittings.
Caterpillar Information System:
584 and 584HD Forwarders Log Loader Grapple Pivot Pins - Lubricate
584 and 584HD Forwarders Log Loader Grapple Mounting Bolts - Check/Tighten
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Modes of Operation
584 and 584HD Forwarders Log Loader Extendable Stick Bearings - Inspect
584 and 584HD Forwarders Log Loader Extendable Stick - Lubricate
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader System Components
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Valve Speed - Set
793F Off-Highway Truck Differential and Final Drive Oil Level - Check
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
584 and 584HD Forwarders Hydraulic System Oil Sample - Obtain
584 and 584HD Forwarders Log Loader Pillar Base Mounting Bolts - Inspect/Replace/Tighten
584 and 584HD Forwarders Log Loader Pillar Base Oil - Change
584 and 584HD Forwarders Log Loader Pillar Base Oil Level - Check
584 and 584HD Forwarders Log Loader Pivot Bearings - Lubricate
584 and 584HD Forwarders Machine System Pressures - Test/Adjust
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061} Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
2009/05/04 New Hydraulic Tubes are Available on Certain 16M Motor Graders {4257, 4263, 5057}
793F Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
797 and 797B Off-Highway Truck/Tractor Engine Air Filter Secondary Element - Replace
584 and 584HD Forwarders Cab Filter (Recirculation) - Clean/Inspect/Replace
584 and 584HD Forwarders Hydraulic System Monitoring and Control System