584 and 584HD Forwarders Caterpillar


Log Loader Grapple Mounting Bolts - Check/Tighten

Usage:

584HD 109





Illustration 1g02732254

The log loader grapple mounting bolts must be checked at regular intervals. There are a total of six nuts that hold the grapple to the rotator. The torque for the six nuts is 200 N·m (150 lb ft).

Caterpillar Information System:

AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Modes of Operation
584 and 584HD Forwarders Log Loader Extendable Stick Bearings - Inspect
584 and 584HD Forwarders Log Loader Extendable Stick - Lubricate
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader System Components
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Valve Speed - Set
793F Off-Highway Truck Differential and Final Drive Oil Level - Check
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
584 and 584HD Forwarders Hydraulic System Oil Sample - Obtain
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Bypass Switch (Rear Axle Lubrication Filter)
2009/05/11 Improved Cover Assembly Is Now Used In the Fuel Lines Group {1274, 1296}
584 and 584HD Forwarders Log Loader Grapple Pivot Pins - Lubricate
584 and 584HD Forwarders Log Loader Pillar Base - Lubricate
584 and 584HD Forwarders Log Loader Pillar Base Mounting Bolts - Inspect/Replace/Tighten
584 and 584HD Forwarders Log Loader Pillar Base Oil - Change
584 and 584HD Forwarders Log Loader Pillar Base Oil Level - Check
584 and 584HD Forwarders Log Loader Pivot Bearings - Lubricate
584 and 584HD Forwarders Machine System Pressures - Test/Adjust
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061} Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
2009/05/04 New Hydraulic Tubes are Available on Certain 16M Motor Graders {4257, 4263, 5057}
793F Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
797 and 797B Off-Highway Truck/Tractor Engine Air Filter Secondary Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.