 |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
 |
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.
- Raise the cab.
ReferenceSee "Cab Tilting" in this manual for more information.
- Use the FR pressure tap port in order to obtain a fluid sample.
ReferenceFor more information, refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample".
 | |
| Illustration 1 | g01902954 |
The hydraulic sampling valve for the 584 Forwarder is located on the right side of the valve block. | |
- Lower the cab.