Suction Screen (Torque Converter) - Clean
Show/hide table
 |
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin. |
 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Park the machine on a level surface with the truck body or OEM attachment in the DOWN position. Engage the parking brake and stop the engine.
- Remove drain plug (2) for the torque converter sump and drain the oil into a suitable container.
Show/hide table
 | |
| Illustration 1 | g01198480 |
- Remove screen cover (1) and the screen assembly.
- Remove the screen and the baffle retaining nut.
- Remove the baffle and the screen from the screen cover.
- Wash the screen, the baffle and the screen cover in a clean, nonflammable solvent. Do not crush the screen.
- Inspect the cover gasket for damage. If the cover gasket is damaged, use a new gasket.
- Install the screen and the baffle on the screen cover. Install the screen cover and the screen assembly.
- Start the engine and operate the engine at low idle. Inspect the area for leaks and make any necessary repairs.
- Check the oil level. Maintain the oil level to the FULL mark in sight gauge (3). If necessary, add oil.
Show/hide table
 | |
| Illustration 2 | g01198508 |
Caterpillar Information System:
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125} Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
785D OEM Off-Highway Truck Secondary Steering - Check
584 and 584HD Forwarders Power Train On/Off Switches
785D OEM Off-Highway Truck Hoist, Torque Converter and Brake Tank Suction Screen - Inspect/Clean/Replace
785D OEM Off-Highway Truck Hoist, Torque Converter and Brake Tank Oil Level - Check
785D OEM Off-Highway Truck Hoist, Torque Converter and Brake Tank Oil - Change
785D OEM Off-Highway Truck Hoist, Torque Converter and Brake Tank Breather - Replace
785D OEM Off-Highway Truck Hoist Screens - Clean
785D OEM Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
785D OEM Off-Highway Truck Frame and Body - Inspect
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
785D OEM Off-Highway Truck Frame - Clean/Inspect
785D OEM Off-Highway Truck Suspension Cylinder - Check
785D OEM Off-Highway Truck Transmission Breather - Clean
2009/07/20 Improved Hose Is Now Used In the Water Lines Group {1380}
785D OEM Off-Highway Truck Reference Material
2009/05/11 Improved Cover Assembly Is Now Used In the Fuel Lines Group {1274, 1296}
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Bypass Switch (Rear Axle Lubrication Filter)
584 and 584HD Forwarders Hydraulic System Oil Sample - Obtain
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
793F Off-Highway Truck Differential and Final Drive Oil Level - Check
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Valve Speed - Set
AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader System Components
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}