430E Backhoe Loader Caterpillar

Specifications

Illustration 1	g01627408

(1) Torque for nut ... 9 ± 1 N·m (80 ± 8 lb in)

Note: Apply 9S-3263 Thread Lock Compound to the threads before assembly.

(2) Location for spray ... 95 ± 25 mm (4 ± 1 inch)

(3) Location for spray ... 40 ± 25 mm (1.5 ± 1 inch)

Illustration 2	g01627406

Tighten nut (4) to a torque of 21 ± 1 N·m (15 ± 1 lb ft). Wait for one half of an hour to four hours and tighten nut (4) again to a torque of 21 ± 1 N·m (15 ± 1 lb ft).

Removal Procedure

Show/hide table



Illustration 3	g01629714

1. Remove lights (1) . Remove nut (2) . Position wiper blade assembly (3) aside. Remove panel (4) .

Show/hide table



Illustration 4	g01629715

2. Disconnect harness assembly (5) . Remove bolts (7) and rear wiper motor (6) .

Installation Procedure

1. Install rear wiper motor (6) in the reverse order of removal.

   1. Tighten nut (2) to a torque of 21 ± 1 N·m (15 ± 1 lb ft). Wait for 1/2 to 4 hours and tighten to a torque of 21 ± 1 N·m (15 ± 1 lb ft).