Counterweight - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-7505 | Hydraulic Jack | 1 |
- Install Tooling (A) under counterweight (2) . Remove bolts (1) .
Show/hide table
 | |
| Illustration 1 | g01120814 |
- Use Tooling (A) in order to lower counterweight (2) to the ground. The weight of counterweight (2) is approximately 490 kg (1080 lb).
Installation Procedure
- Install counterweight (2) in the reverse order of removal.
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Remove
2008/12/08 A New Procedure to Adjust the Charge Relief Valve is Available {4350, 4350}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Remove
785D OEM Off-Highway Truck Power Train Axle Shaft - Install
785D OEM Off-Highway Truck Power Train Axle Shaft - Remove
430E Backhoe Loader Bank Valve - Remove and Install
430E Backhoe Loader Refrigerant Compressor - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive
430E Backhoe Loader Air Conditioner and Heater Components - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Install
2008/08/25 The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
430E Backhoe Loader Window Wiper Motor (Rear) - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Assemble