Flow Control and Relief Valve (Rear Axle Oil) - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Install O-ring seals (6).
Show/hide table
Illustration 2 g01629438 - Install flow control valve and relief valve (5). Install bolts (4). Connect harness assembly (3).
Show/hide table
Illustration 3 g01629429 - Connect hose assembly (2). Connect hose assemblies (1).
Show/hide table
Illustration 1 | g01629613 |
End By:
- Install the oil filter and filter base. Refer to Disassembly and Assembly, "Oil Filter and Base (Rear Axle) - Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install
430E Backhoe Loader Air Conditioner and Heater Components - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive
430E Backhoe Loader Refrigerant Compressor - Remove and Install
430E Backhoe Loader Counterweight - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Remove
2008/12/08 A New Procedure to Adjust the Charge Relief Valve is Available {4350, 4350}
2008/08/25 The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
430E Backhoe Loader Window Wiper Motor (Rear) - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Assemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Assemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Assemble
2008/09/01 New AccuGrade® 900 MHz and 2400 MHz Radios are Now Available {733T}
770 and 772 Off-Highway Truck Mirror