- Excavator:
- 320D (S/N: MDE1-UP; DHK1-UP; FXK1-UP; GKL1-UP; CXY1-UP; EBY1-UP; JGZ1-UP)
- Machine Control & Guidance Products:
- ACCUGRADE (S/N: LGC1-UP)
- Motor Grader:
- 120H (S/N: CAF1-UP)
- Paving Compactor:
- CS-563E (S/N: ASA1-UP; CNG1-UP)
- Track-Type Tractor:
- D3G (S/N: CFC1-UP; CFF1-UP; JMH1-UP; ZDN1-UP; BYR1-UP; CXT1-UP)
- 323D (S/N: SDC1-UP; CYD1-UP; PBM1-UP; DKW1-UP)
- 324D (S/N: LAB1-UP; EJC1-UP; T2D1-UP; JJG1-UP; JGK1-UP; SYM1-UP; DFP1-UP; JKR1-UP; JLS1-UP; CJX1-UP)
- 325D (S/N: GPB1-UP; PKE1-UP; KDG1-UP; C4H1-UP; C7K1-UP; RJK1-UP; C8L1-UP; MCL1-UP; PAL1-UP; C9M1-UP; AZP1-UP; A3R1-UP; GBR1-UP; LWR1-UP; SCR1-UP; T2S1-UP; CYW1-UP)
- 330D (S/N: NBD1-UP; GGE1-UP; B6H1-UP; THJ1-UP; C5K1-UP; E4K1-UP; H3K1-UP; L2K1-UP; PEL1-UP; JJM1-UP; LEM1-UP; ERN1-UP; JLP1-UP; MWP1-UP; HAS1-UP; RAS1-UP; EDX1-UP; MEY1-UP; T2Y1-UP)
- 345C (S/N: KBA1-UP; TBA1-UP; FPC1-UP; SPC1-UP; ESD1-UP; WDE1-UP; AYF1-UP; CWG1-UP; TDG250-UP; GPH1-UP; TAJ1-UP; A3L1-UP; GCL1-UP; BZN1-UP; DHP1-UP; GJR1-UP; M2R1-UP; D3S1-UP; ELS1-UP; LYS1-UP; PJW350-UP; CPX1-UP; BWY1-UP)
- 365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
- 385C (S/N: EDA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
- 120M (S/N: B9C1-UP; B9N1-UP)
- 12H (S/N: CBK1-UP; AMZ286-UP)
- 12M (S/N: B9F1-UP; B9R1-UP)
- 135H (S/N: CBC1-UP)
- 140H (S/N: CCA1-UP; APM2223-UP)
- 140M (S/N: B9D1-UP; B9M1-UP)
- 143H (S/N: APN662-UP)
- 14H (S/N: ASE1380-UP)
- 14M (S/N: B9J105-UP)
- 160H (S/N: ASD496-UP; CCP1-UP)
- 160M (S/N: B9E1-UP; B9L1-UP)
- 163H (S/N: ARL388-UP)
- 16H (S/N: ATS466-UP)
- 16M (S/N: B9H100-UP)
- CS-573E (S/N: CEB1-UP; CNN1-UP)
- CS-583E (S/N: DAJ1-UP; CNX1-UP)
- CS-663E (S/N: ASB1-UP; DAG1-UP)
- CS-683E (S/N: DAD1-UP; ASG1-UP)
- CS56 (S/N: C5S1-UP; FCS1-UP)
- CS64 (S/N: C7F1-UP; C6S1-UP)
- CS74 (S/N: C8F1-UP; C8S1-UP)
- CS76 (S/N: JCS1-UP; CYX1-UP)
- D3K (S/N: FFF1-UP; LLL1-UP)
- D4G (S/N: FDC1-UP; HYD1-UP; CFN1-UP; TLX1-UP)
- D4K (S/N: MMM1-UP; RRR1-UP)
- D5G (S/N: RKG1-UP; FDH1-UP; CLW1-UP; FDW1-UP)
- D5K (S/N: JLF1-UP; WWW1-UP; YYY1-UP)
- D5N (S/N: AKD1135-UP; AGG1335-UP; CFH300-UP; CKT400-UP)
- D6K (S/N: DHA1-UP; FBH1-UP)
- D6N (S/N: DJA1-UP; CBF300-UP; CCG400-UP; ALH735-UP; CBJ400-UP; CCK500-UP; CBL400-UP; AKM1235-UP; ALR635-UP; CCS400-UP; ALY1335-UP; DJY1-UP)
- D6RSeries II (S/N: ADE646-UP; AFM140-UP; AEP435-UP; AAX797-UP)
- D6RSeries III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; RFC1-UP; TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP; MTJ1-UP; DMK1-UP; JEK1-UP; EXL1-UP; JDL1-UP; DLM1-UP; LFM1-UP; LGP1-UP; DPS1-UP; GMT1-UP; MRT1-UP; EXW1-UP)
- D6T (S/N: JHB1-UP; ZEB1-UP; SMC1-UP; JWD1-UP; LBD1-UP; LAE1-UP; DJG1-UP; WCG1-UP; WFH1-UP; LKJ1-UP; SNK1-UP; DHL1-UP; KJL2-UP; SKL1-UP; KLM1-UP; GCT1-UP; RLW1-UP; LAY1-UP; RAY1-UP; PEZ1-UP)
- D8T (S/N: J8B1-UP; KPZ1-UP)
- D9T (S/N: RJS1-UP)
The new CR900 and CR924 radios for AccuGrade® have been released. The radios are available for new AccuGrade systems. The radios can be used in order to replace the TC900 and TC2400 radios.
Note: The CR900 radio can be used to replace a TC900 radio on a machine that uses the Computer Aided Earthmoving System (CAES) application.
Installation
Refer to Special Instruction, REHS4459, "Installation of Series CR Radios" for your specific type of machine.
The following information is included in the manual:
- Ordering information
- Parts list
- Safety information
- Basic installation instructions
- Machine specific installation instructions
Models
Illustration 1 | g01634158 |
Series CR radios (1) CR900 (single antenna) (2) CR924 (dual antenna) |
Note: Consult the price pages in order to determine the correct radio for your geographic location.
CR900 (Single Antenna)
The CR900 radio (1) operates on a 900 MHz band. The radio has a single antenna for this band.
The CR900 radio is used for the Global Positioning System (GPS).
The CR900 radio does not support the following:
- Infrastructure
- Single Channel
- Multiple Single Channel
CR924 (Dual Antenna)
The CR924 radio (2) can operate on either a 2400 MHz band or on a 900 MHz band. The radio uses separate electronics and a separate antenna for each band.
The CR924 radio is used for the Automatic Tracking System (ATS) and for the GPS. The CR924 radio allows the system to change from ATS to GPS without reinstalling a different radio.
Features
Standard Platform
Illustration 2 | g01631634 |
Series CR924 radio (3) 2400 MHz antenna (CR924 only) (4) 900 MHz antenna (5) Light Emitting Diode (LED) (6) 8-pin connector |
Both of the models include the following features:
- Rugged chassis that is mounted to the machine
- Rubber antenna(s) (3) and (4) that are flexible
- LED (5) that provides information for the status of the radio
- 8-pin connector (6) to provide power and signal for the radio
- Configuration of the system by using the MCGFlash tool for the PC
- Troubleshooting of the system by using the MCGFlash tool for the PC
- Firmware that can be upgraded by using the display on the system
900 MHz Radio (CR900 and CR924)
The features of the 900 MHz radio are listed below:
- Receives corrections from the GPS base station
- Capable of two-way communication
- Compatible with Trimble base stations
2400 MHz Radio (CR924 Only)
The features of the 2400 MHz radio are listed below:
- Compatible with Trimble ATS base station radios
- Includes an L1 receiver for future GPS applications