2008/09/15 Caterpillar

Load Haul Dump:

R1700G (S/N: SBR1-UP; 8XZ1-UP)

Specifications, RENR6254, "R1700G Load Haul Dump Power Train", "Specifications". This module is part of Service Manual, RENR6258 Volume 1Specifications, RENR4659, "R1700G Load Haul Dump Power Train", "Specifications". This module is part of Service Manual, RENR4656 Volume 1

The information in this article has changed. Replace this information with the following information.

Oscillating Axle (Rear)

Illustration 1	g01630494

(1) Torque for the six nuts ... 1000 ± 125 N·m (735 ± 90 lb ft)

(2) Torque for the ten bolts ... 530 ± 70 N·m (390 ± 50 lb ft)

(3) Inside diameter of the support trunnion ... 249 ± 0.25 mm (9.803 ± 0.010 inch)

(4) Bearing sleeve

Outside diameter of the bearing sleeve ... 246 ± 0.15 mm (9.685 ± 0.006 inch)

Thickness of the bearing sleeve ... 8.27 ± 0.13 mm (0.326 ± 0.005 inch)

(5) Torque for the 16 bolts ... 530 ± 70 N·m (390 ± 50 lb ft)

(6) Inside diameter of the support trunnion ... 289.65 ± 0.10 mm (11.403 ± 0.004 inch)

(7) Bearing sleeve

Outside diameter of the bearing sleeve ... 290 ± 0.15 mm (11.417 ± 0.006 inch)

Thickness of the bearing sleeve ... 11.65 ± 0.13 mm (0.459 ± 0.005 inch)

(8) Torque for the ten bolts ... 530 ± 70 N·m (390 ± 50 lb ft)

(9) Outside diameter of the pinion housing ... 228.70 ± 0.08 mm (9.004 ± 0.003 inch)

(10) Outside diameter of the trunnion housing ... 265.60 ± 0.08 mm (10.457 ± 0.003 inch)

(11) Torque for the four nuts ... 1000 ± 125 N·m (735 ± 90 lb ft)

(12) Torque for the 24 nuts ... 1000 ± 125 N·m (735 ± 90 lb ft)

(13) Torque for the 24 nuts ... 1000 ± 125 N·m (735 ± 90 lb ft)