Final Drive Planetary - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-1863 | Retaining Ring Pliers | 1 |
- Install shaft (1). Install roller bearings (2), planetary gear (5), and thrust washer (3). Use Tooling (A) and install retaining ring (4).
- Repeat Step 1 for the remaining planetary gear assemblies.
Show/hide table
| |
| Illustration 1 | g01629979 |
End By:
- Install the final drive planetary. Refer to Disassembly and Assembly, "Final Drive Planetary - Install".
Caterpillar Information System:
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Assemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Remove
430E Backhoe Loader Window Wiper Motor (Rear) - Remove and Install
2008/08/25 The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Install
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install
430E Backhoe Loader Air Conditioner and Heater Components - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Assemble
2008/09/01 New AccuGrade® 900 MHz and 2400 MHz Radios are Now Available {733T}
770 and 772 Off-Highway Truck Mirror
2008/09/15 Correction to Specifications , "Oscillating Axle (Rear)" {3260, 3278}
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger
2008/09/08 Version 92 Software is Now Available for Reclaimer Mixers {7620}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Drive and Steering Axle (Front) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Drive and Steering Axle (Front) - Install
2008/08/25 New Engine Wiring Harnesses Are Used {1408}