Tie Rod (Steering)(Front) - Remove and Install
Removal Procedure
Start By:
- Remove the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) -Remove and Install".
- Remove nut (1). Loosen nut (3) .
Show/hide table
Illustration 1 | g01628994 |
- Remove tie rod (2) .
Installation Procedure
- Install tie rod (2) .
Show/hide table
Illustration 2 | g01628994 |
- Install nut (1). Tighten nut (1) to a torque of 280 N·m (205 lb ft). Tighten nut (3) to a torque of 250 N·m (185 lb ft).
End By: Install the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) -Remove and Install".
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Remove
2008/12/08 A New Procedure to Adjust the Charge Relief Valve is Available {4350, 4350}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Remove
785D OEM Off-Highway Truck Power Train Axle Shaft - Install
785D OEM Off-Highway Truck Power Train Axle Shaft - Remove
430E Backhoe Loader Bank Valve - Remove and Install
2015/07/17 A New Cylinder Pack Is Now Used {1225, 1239}
New Piston Pin Is Now Available in 3400 Cylinder Packs {1225, 1239} New Piston Pin Is Now Available in 3400 Cylinder Packs {1225, 1239}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217} Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
AccuGrade For Wheel Tractor-Scrapers Electrical Power Supply (GPS Receiver)
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Install
430E Backhoe Loader Counterweight - Remove and Install
430E Backhoe Loader Refrigerant Compressor - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive
430E Backhoe Loader Air Conditioner and Heater Components - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Install
2008/08/25 The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
430E Backhoe Loader Window Wiper Motor (Rear) - Remove and Install