Gear Pump (Rear Axle Lubrication) - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 154-9731 | Thread Lock Compound | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Install O-ring seal (7).
Show/hide table
Illustration 2 g01629256 - Install adapter (6) onto gear pump (4). Apply Tooling (A) onto bolts (5). Install bolts (5).
Show/hide table
Illustration 3 g01629235 - Use two people in order to install gear pump (4). The weight of gear pump (4) is approximately
30 kg (65 lb) . Install bolts (3). Connect hose assembly (2). Connect hose assembly (1). - Fill the differential with oil. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change".
Show/hide table
| |
| Illustration 1 | g01629274 |
End By:
- Install the gear motor. Refer to Disassembly and Assembly, "Gear Motor (Rear Axle Lubrication) - Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Remove
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Remove
2008/12/08 A New Procedure to Adjust the Charge Relief Valve is Available {4350, 4350}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Pad (Truck Body Mounting) - Remove
785D OEM Off-Highway Truck Power Train Axle Shaft - Install
785D OEM Off-Highway Truck Power Train Axle Shaft - Remove
430E Backhoe Loader Bank Valve - Remove and Install
2015/07/17 A New Cylinder Pack Is Now Used {1225, 1239}
430E Backhoe Loader Counterweight - Remove and Install
430E Backhoe Loader Refrigerant Compressor - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive
430E Backhoe Loader Air Conditioner and Heater Components - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Steering Cylinder (Front) - Remove and Install
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Remove
785D OEM Off-Highway Truck Power Train Flow Control and Relief Valve (Rear Axle Oil) - Install
2008/08/25 The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
430E Backhoe Loader Window Wiper Motor (Rear) - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Final Drive Planetary - Disassemble