Water Temperature Contactor
Usage:
Remove And Install Water Temperature Contactor
1. Drain the coolant from the cooling system.
2. Disconnect wiring harness (1) from the contactor.
3. Remove contactor (2) from the water housing.
4. Install contactor (2) in the water housing.
5. Connect wiring harness (1) to the contactor.
6. Fill the cooling system with coolant to the correct level. See the Maintenance Manual for the correct fluid level.
Caterpillar Information System:
3516 MARINE ENGINE Fuel Filter Housing
3516 MARINE ENGINE Sea Water Pump
3516 MARINE ENGINE Auxiliary Pump (Fresh Water)
3516 MARINE ENGINE Water Pump
3516 MARINE ENGINE Water Temperature Regulators
3516 MARINE ENGINE Crankcase Breather
3516 MARINE ENGINE Service Meter
3516 MARINE ENGINE Air Intake Shutoff
3516 MARINE ENGINE Contactor Group
3516 MARINE ENGINE Exhaust Elbow (Dry)
3516 MARINE ENGINE Manual Shutoff
2301A SPEED CONTROL Appendix B. EMI Controls in Electronic Governing Systems
3516 MARINE ENGINE Fuel Priming Pump
3516 MARINE ENGINE Fuel Transfer Pump
3516 MARINE ENGINE Oil Pump
3516 MARINE ENGINE Oil Filter Housing
3516 MARINE ENGINE Oil Pan
3516 MARINE ENGINE Oil Sequence Valves
3516 MARINE ENGINE Oil Cooler
3516 MARINE ENGINE Heat Exchanger
3516 MARINE ENGINE Governor (3161)
3516 MARINE ENGINE Governor Drive
3516 MARINE ENGINE Turbochargers
3516 MARINE ENGINE Air Inlet Manifold