Service Meter
Usage:
Remove and Install Service Meter
1. Remove and disconnect service meter electrical leads (1). Remove clip (2) securing the other portion of electrical leads.
2. Remove clip (4) securing the other portion of electrical leads. Remove two bolts (3) and remove service meter (5).
NOTE: Installation of the service meter is accomplished in the exact reverse order from removal. Insure that the electrical leads are clean and are not damaged prior to installation.
Caterpillar Information System:
3516 MARINE ENGINE Air Intake Shutoff
3516 MARINE ENGINE Contactor Group
3516 MARINE ENGINE Exhaust Elbow (Dry)
3516 MARINE ENGINE Manual Shutoff
2301A SPEED CONTROL Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A SPEED CONTROL Chapter 5. Troubleshooting
2301A SPEED CONTROL Installation And Operation
2301A SPEED CONTROL Installation And Operation
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Testing And Adjusting Of The SW 50-03 Setpoint Adjuster
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Diagram Of Dimensions
HEINZMAN GOVERNOR (3600 MARINE APPLICATION) Electrical Connection For The E30 Governors
3516 MARINE ENGINE Crankcase Breather
3516 MARINE ENGINE Water Temperature Regulators
3516 MARINE ENGINE Water Pump
3516 MARINE ENGINE Auxiliary Pump (Fresh Water)
3516 MARINE ENGINE Sea Water Pump
3516 MARINE ENGINE Fuel Filter Housing
3516 MARINE ENGINE Water Temperature Contactor
3516 MARINE ENGINE Fuel Priming Pump
3516 MARINE ENGINE Fuel Transfer Pump
3516 MARINE ENGINE Oil Pump
3516 MARINE ENGINE Oil Filter Housing
3516 MARINE ENGINE Oil Pan