Feeder Drive Shaft (Drag)
Show/hide table
 | |
| Illustration 1 | g01453849 |
(1) Apply 4C-4030 Thread Lock Compound to threads of the ten socket setscrews.
(2) Apply 4C-4030 Thread Lock Compound to threads of the two setscrews.
(3) Apply 4C-4030 Thread Lock Compound to threads of the setscrew for the two bearings.
Show/hide table
 | |
| Illustration 2 | g01453850 |
Section A-A | |
(4) As required, use 129-4543 Washer :
- Quantity ... 4
- Thickness of one washer ... 1.6 mm (0.06 inch)
(5) Shaft
- Quantity ... 2
- Diameter of one shaft ... 63.5 mm (2.50 inch)
(6) Apply 4C-4030 Thread Lock Compound to threads of the four bolts.
(7) Apply 4C-4030 Thread Lock Compound to threads of the setscrew for the two flange bearings.
Caterpillar Information System:
C4.4 Industrial Engine Accessory Drive - Install
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Remove
AP600D and BG600D Asphalt Pavers Machine Systems Drag Conveyor
2008/02/25 Correction to "Machine Repairs and Welding Procedures" {6107}
R1700G Load Haul Dump Machine Electrical System Indicator - Primary/Secondary Steering
AP600D and BG600D Asphalt Pavers Engine Oil and Filter - Change
AP600D and BG600D Asphalt Pavers Engine Oil Sample - Obtain
Installation of the Pitch and Roll Angle Sensor for CAESultra{1439, 7604} Installation of the Pitch and Roll Angle Sensor for CAESultra{1439, 7604}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
2008/02/04 A New Oil Level Gauge As and Oil Gauge Tube Assembly is Available {1326}
C27 and C32 Engines for Caterpillar Built Machines Compression Brake Solenoid Circuit - Test
416E, 420E and 430E Backhoe Loaders Transmission (Autoshift) Transmission and Torque Converter - Test
AS2252C Asphalt Screed Flow Divider Valve - Remove and Install
AS2252C Asphalt Screed Gear Motor (Vibratory - Main) - Remove
AS2252C Asphalt Screed Gear Motor (Vibratory - Main) - Install
C27 and C32 Engines for Caterpillar Built Machines Switch Circuits - Test
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Flash Program
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
AP600D and BG600D Asphalt Pavers Fuel System - Prime
AP600D and BG600D Asphalt Pavers Fuel System Filter (Washdown) - Clean
AP600D and BG600D Asphalt Pavers Fuel System Primary Filter - Clean/Inspect/Replace
AP600D and BG600D Asphalt Pavers Fuel System Secondary Filter - Replace