C4.4 Industrial Engine Caterpillar


Accessory Drive - Disassemble

Usage:

C4.4 444

拆解步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
8H-0663  轴承拉拔器 
5F-7345 拉拔器 
126-7183 十字挡块 
126-7177 拉拔器腿 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

按照本地法规和指令处置所有液体。




    图 1g01440573
    典型实例

  1. 从附件驱动壳体 (4) 上卸下簧环 (9)。

  2. 将附件驱动壳体 (4) 放在适当的支架上。 将齿轮 (7)、轴承 (6) 和轴承 (8) 的组件从附件驱动壳体 (4) 中按压出来。

  3. 使用工具 (A),从齿轮 (7) 上卸下轴承 (6) 和轴承 (8)。

Caterpillar Information System:

C4.4 Industrial Engine Accessory Drive - Remove
AP600D and BG600D Asphalt Pavers Machine Systems Drag Conveyor
2008/02/25 Correction to "Machine Repairs and Welding Procedures" {6107}
R1700G Load Haul Dump Machine Electrical System Indicator - Primary/Secondary Steering
AP600D and BG600D Asphalt Pavers Engine Oil and Filter - Change
AP600D and BG600D Asphalt Pavers Engine Oil Sample - Obtain
Installation of the Pitch and Roll Angle Sensor for CAESultra{1439, 7604} Installation of the Pitch and Roll Angle Sensor for CAESultra{1439, 7604}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
2008/02/04 A New Oil Level Gauge As and Oil Gauge Tube Assembly is Available {1326}
2008/02/11 Correction to Operation and Maintenance Manual , "Alternator Air Vent Line and Screen - Clean" {1071, 1405}
C4.4 Engines For Caterpillar Built Machines Engine Will Not Crank
AP600D and BG600D Asphalt Pavers Engine Oil Level - Check
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Install
AP555E and BG555E Asphalt Pavers Machine Systems Feeder Drive Shaft (Drag)
C27 and C32 Engines for Caterpillar Built Machines Compression Brake Solenoid Circuit - Test
416E, 420E and 430E Backhoe Loaders Transmission (Autoshift) Transmission and Torque Converter - Test
AS2252C Asphalt Screed Flow Divider Valve - Remove and Install
AS2252C Asphalt Screed Gear Motor (Vibratory - Main) - Remove
AS2252C Asphalt Screed Gear Motor (Vibratory - Main) - Install
C27 and C32 Engines for Caterpillar Built Machines Switch Circuits - Test
854K Wheel Dozer and 992K Wheel Loader Power Train Electronic Control Module (ECM) - Flash Program
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
AP600D and BG600D Asphalt Pavers Fuel System - Prime
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.