PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO COOLANT LINE ON CERTAIN 3512C LOCOMOTIVE ENGINES
Usage:
REBE9337-01
Show/hide table
| 23Jan2013 |
| (Revised 11Mar2013) |
U-28
O-28
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO COOLANT LINE ON CERTAIN 3512C LOCOMOTIVE ENGINES |
|
| 1380 | PS43825 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43825" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 23Jan2013 Service Letter. A change has been made to the Service Claim Allowances. |
Show/hide table
TERMINATION DATE |
| 31Jan2015 |
PROBLEM
Show/hide table
| A turbo coolant line may leak on certain 3512C Locomotive Engines. The 339-7840 Coolant Tube on the right hand side turbo is suspect. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512C | NJT00102-00231 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 6V5064 | SEAL-O-RING |
| 2 | 6V9746 | SEAL-O-RING-ORFS |
| 1 | 1623122 | ADAPTER-ELBOW |
| 1 | 3672839 | HOSE AS-WATER |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Drain the coolant. Remove the current 339-7840 Steel Tube and straight adapter from the right hand turbo and water manifold. Install the 162-3122 Adapter Elbow with the 6V-5064 O-ring between the adapter and the manifold. Install the 367-2839 Hose Assembly with a 6V-9746 O-ring at each end of the hose assembly. Refill the engine with coolant. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR THE INSPECTION AND POSSIBLE REWORK OF THE BUS MOUNTING HARDWARE USED WITH MASTERPACT CIRCUIT BREAKERS (800 TO 6,300 AMP) ON CERTAIN C32, 3512, 3512B, 3516, 3516B, 3516C, AND C175-16 GENERATOR SETS, PM3516, AND PMG3516C PRODUCT IMPROVEMENT PROGRAM FOR THE INSPECTION AND POSSIBLE REWORK OF THE BUS MOUNTING HARDWARE USED WITH MASTERPACT CIRCUIT BREAKERS (800 TO 6,300 AMP) ON CERTAIN C32, 3512, 3512B, 3516, 3516B, 3516C, AND C175-16 GENERATOR SETS, PM3516, AND PMG3516C
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAIN #2 AND TRAIN #3 GEAR TRAIN COMPONENTS IN CERTAIN TH48-E80 FRAC TRANSMISSIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAIN #2 AND TRAIN #3 GEAR TRAIN COMPONENTS IN CERTAIN TH48-E80 FRAC TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN G3516 AND G3516B ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN G3516 AND G3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ON CERTAIN C27, C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, GENERATOR SETS AND PMC27 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ON CERTAIN C27, C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, GENERATOR SETS AND PMC27 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBOCHARGER ON CERTAIN 3512B MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBOCHARGER ON CERTAIN 3512B MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBOCHARGER ON CERTAIN 3512B, AND 3516B MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBOCHARGER ON CERTAIN 3512B, AND 3516B MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN G3408, G3408C, AND G3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING 20R-1282 FUEL INJECTORS ON CERTAIN 3512C, AND 3516C ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING 20R-1282 FUEL INJECTORS ON CERTAIN 3512C, AND 3516C ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 266-7074 PLANET SHAFT AS ON CERTAIN CX31 TRANSMISSIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 266-7074 PLANET SHAFT AS ON CERTAIN CX31 TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 20R-1282 FUEL INJECTORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 20R-1282 FUEL INJECTORS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING INTEGRATED SENSING MODULE ON CERTAIN G3606, G3608, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING INTEGRATED SENSING MODULE ON CERTAIN G3606, G3608, AND G3616 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR SHUT OFF ON CERTAIN C7, AND C9 PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR SHUT OFF ON CERTAIN C7, AND C9 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACE HEATER MOUNTING BRACKETS ON CERTAIN 3516B, 3516C, 3516C HD, G3516H HD, G3520H HD, CG170-16, C175-16, AND C175-20 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACE HEATER MOUNTING BRACKETS ON CERTAIN 3516B, 3516C, 3516C HD, G3516H HD, G3520H HD, CG170-16, C175-16, AND C175-20 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE GLOW PLUG CIRCUIT ON CERTAIN XQ200 RENTAL GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE GLOW PLUG CIRCUIT ON CERTAIN XQ200 RENTAL GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON CERTAIN 3512C MARINE AUXILIARY ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON CERTAIN 3512C MARINE AUXILIARY ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 422-0647 ENGINE HARNESS ON CERTAIN C3.4B INDUSTRIAL ENGINES INSTALLED IN TL943C AND TL642C TELEHANDLERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 422-0647 ENGINE HARNESS ON CERTAIN C3.4B INDUSTRIAL ENGINES INSTALLED IN TL943C AND TL642C TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN 3508B AND 3508C LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN 3508B AND 3508C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXHAUST ELBOW ASSEMBLY ON CERTAIN XQ350 RENTAL GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXHAUST ELBOW ASSEMBLY ON CERTAIN XQ350 RENTAL GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING COOLING SYSTEM ADDITIVE ON CERTAIN C18 INDUSTRIAL ENGINES WITH ALUMINUM RADIATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING COOLING SYSTEM ADDITIVE ON CERTAIN C18 INDUSTRIAL ENGINES WITH ALUMINUM RADIATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 378-8458 GAS SHUTOFF VALVE (GSOV) ON CERTAIN G3516, G3516B, AND G3520B ENGINES