AS3301C Asphalt Screed Caterpillar


Deflector Plates (Strike-Off) - Remove and Install

Usage:

AS3301C DWM

Removal Procedure

Main

  1. Start the engine and extend the screed. Stop the engine.



    Illustration 1g01305756

  1. Remove bolts (1) and plate (2) .

  1. Remove bolts (3) and plate (4) .



    Illustration 2g01305759

  1. Remove nuts (5) .



    Illustration 3g01305761

  1. Remove the right hand deflector plate and the left hand deflector plate (6) .

Extender




    Illustration 4g01305763

  1. Remove bolts (8) .

  1. Remove deflector plate (7) .

  1. Repeat Step 1 and Step 2 on the other extender.

Installation Procedure

Extender




    Illustration 5g01305763

  1. Install deflector plate (7) .

  1. Install bolts (8) .

  1. Repeat Step 1 and Step 2 on the other extender.

Main




    Illustration 6g01305761

  1. Install the left hand deflector plate and the right hand deflector plate (6) .



    Illustration 7g01305759

  1. Install nuts (5) .



    Illustration 8g01305756

  1. Install plate (4) and bolts (3). Tighten bolts (3) to a torque of 30 N·m (22 lb ft) and then back off bolts (3) one half turn.

  1. Install plate (2) and bolts (1) .

Caterpillar Information System:

120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2113 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2113 - FMI 03
2006/09/25 An Update to the Spider Assembly Improves the Retention of the Stake Nut in the Differential Assembly {3258}
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Install
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Remove
AS3251C Asphalt Paver Screed Plate (Extender) - Remove and Install
AS3251C Asphalt Paver Screed Plate (Main) - Remove and Install
2006/10/02 A Discharge Chute for Debris in the Ejector Body Is Used {6203}
2006/10/16 Scrapers for the Tracks on the Floor for the Ejector Body Can Be Made {6203}
The Response of the Implements Are Slow Due to the Hydraulic Pump{5070} The Response of the Implements Are Slow Due to the Hydraulic Pump{5070}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1704 - FMI 06
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1674 - FMI 06
2006/10/02 An Improved Damper for the Suspension Seat Is Used {7312, 7324}
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Disassemble
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Assemble
2006/09/11 A New Thermostat for the Jacket Water Heater {1383}
AS3301C Asphalt Screed Sloper Group - Remove
AS3301C Asphalt Screed Sloper Group - Install
AS3301C Asphalt Screed Sloper Jack - Remove
2008/02/25 Improved Solenoid Valve Groups Are Available {5479}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1705 - FMI 03
AS3301C Asphalt Screed Sloper Jack - Install
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Hydraulic Tank
AS3301C Asphalt Screed Hydraulic Cylinder (Extender Extend) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.